This is the latest recevied telemetry packets stored in our database for station/object IQ5VK-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758206231 | 14.32 VDC | 0 | 0 | 0 | 0 |
| 1758205324 | 14.3 VDC | 0 | 0 | 0 | 0 |
| 1758204416 | 14.32 VDC | 0 | 0 | 0 | 0 |
| 1758203509 | 14.4 VDC | 0 | 0 | 0 | 0 |
| 1758202602 | 14.4 VDC | 0 | 0 | 0 | 0 |
| 1758201695 | 14.3 VDC | 0 | 0 | 0 | 0 |
| 1758200788 | 14.36 VDC | 0 | 0 | 0 | 0 |
| 1758199881 | 14.36 VDC | 0 | 0 | 0 | 0 |
| 1758198974 | 14.4 VDC | 0 | 0 | 0 | 0 |
| 1758198067 | 14.36 VDC | 0 | 0 | 0 | 0 |
| 1758197159 | 14.5 VDC | 0 | 0 | 0 | 0 |
| 1758196254 | 14.34 VDC | 0 | 0 | 0 | 0 |
| 1758195516 | 14.5 VDC | 0 | 0 | 0 | 0 |
| 1758194609 | 14.38 VDC | 0 | 0 | 0 | 0 |
| 1758193702 | 14.4 VDC | 0 | 0 | 0 | 0 |
| 1758192794 | 14.36 VDC | 0 | 0 | 0 | 0 |
| 1758191887 | 14.28 VDC | 0 | 0 | 0 | 0 |
| 1758190980 | 14.26 VDC | 0 | 0 | 0 | 0 |
| 1758190073 | 14.94 VDC | 0 | 0 | 0 | 0 |
| 1758189166 | 14.92 VDC | 0 | 0 | 0 | 0 |
| 1758188259 | 14.94 VDC | 0 | 0 | 0 | 0 |
| 1758187351 | 14.9 VDC | 0 | 0 | 0 | 0 |
| 1758186444 | 14.9 VDC | 0 | 0 | 0 | 0 |
| 1758185537 | 14.9 VDC | 0 | 0 | 0 | 0 |
| 1758184630 | 14.98 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)