This is the latest recevied telemetry packets stored in our database for station/object IW1QQG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765963381 | 3.52 VDC | 0 | 0 | 0 | 0 |
| 1765959781 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1765956181 | 3.58 VDC | 0 | 0 | 0 | 0 |
| 1765952581 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1765948981 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1765945381 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1765941781 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1765938181 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1765934581 | 3.73 VDC | 0 | 0 | 0 | 0 |
| 1765930981 | 3.79 VDC | 0 | 0 | 0 | 0 |
| 1765927381 | 3.84 VDC | 0 | 0 | 0 | 0 |
| 1765923780 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 1765923650 | 3.94 VDC | 0 | 0 | 0 | 0 |
| 1765922519 | 3.84 VDC | 0 | 0 | 0 | 0 |
| 1765921977 | 3.79 VDC | 0 | 0 | 0 | 0 |
| 1765920507 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1765918707 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1765916907 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1765915107 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1765913307 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1765911506 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1765909706 | 3.67 VDC | 0 | 0 | 0 | 0 |
| 1765907906 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1765906106 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1765904306 | 3.74 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)