This is the latest recevied telemetry packets stored in our database for station/object HP1COO-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274825 | 556 | 0 | 0 | 0 | 0 |
| 1782512272 | 556 | 0 | 0 | 0 | 0 |
| 1782508664 | 554 | 0 | 0 | 0 | 0 |
| 1782505053 | 556 | 0 | 0 | 0 | 0 |
| 1782501443 | 551 | 0 | 0 | 0 | 0 |
| 1782497836 | 556 | 0 | 0 | 0 | 0 |
| 1782494224 | 554 | 0 | 0 | 0 | 0 |
| 1782490617 | 554 | 0 | 0 | 0 | 0 |
| 1782487005 | 554 | 0 | 0 | 0 | 0 |
| 1782483397 | 553 | 0 | 0 | 0 | 0 |
| 1782479788 | 554 | 0 | 0 | 0 | 0 |
| 1782472572 | 553 | 0 | 0 | 0 | 0 |
| 1782468963 | 553 | 0 | 0 | 0 | 0 |
| 1782461745 | 553 | 0 | 0 | 0 | 0 |
| 1782458136 | 553 | 0 | 0 | 0 | 0 |
| 1782454529 | 554 | 0 | 0 | 0 | 0 |
| 1782450912 | 556 | 0 | 0 | 0 | 0 |
| 1782447297 | 554 | 0 | 0 | 0 | 0 |
| 1782443690 | 555 | 0 | 0 | 0 | 0 |
| 1782440082 | 553 | 0 | 0 | 0 | 0 |
| 1782436473 | 554 | 0 | 0 | 0 | 0 |
| 1782432863 | 555 | 0 | 0 | 0 | 0 |
| 1782429250 | 548 | 3 | 3 | 2 | 3 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)