APRS Track Direct

My position About ☰

reset

HS4IOO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4IOO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1765966054	35.02 °C	36.9 %RH	1003.5 hPa	4.18 V
1765965454	35.27 °C	36.9 %RH	1003.4 hPa	4.18 V
1765964854	35.29 °C	37.1 %RH	1003.3 hPa	4.18 V
1765964254	35.2 °C	37.2 %RH	1003.2 hPa	4.18 V
1765963654	36.06 °C	36.1 %RH	1003.1 hPa	4.17 V
1765963054	36.22 °C	36 %RH	1003 hPa	4.17 V
1765962454	35.59 °C	37.1 %RH	1003 hPa	4.09 V
1765961854	36.15 °C	36.3 %RH	1002.9 hPa	4.1 V
1765961254	35.63 °C	37 %RH	1002.9 hPa	4.11 V
1765960654	35.97 °C	36.7 %RH	1003 hPa	4.13 V
1765960054	36.2 °C	36.4 %RH	1003 hPa	4.18 V
1765959454	37.22 °C	34.4 %RH	1003.1 hPa	4.19 V
1765958853	36.38 °C	34.9 %RH	1003.1 hPa	4.18 V
1765958253	35.63 °C	36.8 %RH	1003.1 hPa	4.18 V
1765957653	35.2 °C	37.3 %RH	1003.2 hPa	4.18 V
1765957053	36.81 °C	34.5 %RH	1003.2 hPa	4.17 V
1765956453	35.93 °C	35 %RH	1003.3 hPa	4.17 V
1765955853	36.18 °C	34.5 %RH	1003.4 hPa	4.17 V
1765955253	36.88 °C	33.9 %RH	1003.5 hPa	4.17 V
1765954653	35.27 °C	36.3 %RH	1003.6 hPa	4.1 V
1765954053	34.75 °C	36.8 %RH	1003.8 hPa	4.11 V
1765953453	36.68 °C	34.5 %RH	1004 hPa	4.12 V
1765952853	35.66 °C	35.7 %RH	1004.1 hPa	4.14 V
1765952253	34.45 °C	37.4 %RH	1004.4 hPa	4.18 V
1765951653	34.58 °C	37.3 %RH	1004.6 hPa	4.18 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)