APRS Track Direct

My position About ☰

reset

VA3LCI Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA3LCI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1782483542	13.83 Volt	200 Pkt	85 Pcnt	26 Pkt
1782483242	13.83 Volt	200 Pkt	86 Pcnt	35 Pkt
1782482942	13.83 Volt	200 Pkt	85 Pcnt	27 Pkt
1782482642	13.83 Volt	200 Pkt	86 Pcnt	21 Pkt
1782482342	13.83 Volt	200 Pkt	86 Pcnt	31 Pkt
1782482042	13.83 Volt	200 Pkt	86 Pcnt	31 Pkt
1782481742	13.83 Volt	210 Pkt	87 Pcnt	35 Pkt
1782481442	13.83 Volt	210 Pkt	86 Pcnt	35 Pkt
1782481142	13.83 Volt	200 Pkt	86 Pcnt	28 Pkt
1782480842	13.83 Volt	210 Pkt	87 Pcnt	31 Pkt
1782480542	13.83 Volt	210 Pkt	87 Pcnt	36 Pkt
1782480242	13.83 Volt	210 Pkt	87 Pcnt	32 Pkt
1782479942	13.83 Volt	210 Pkt	87 Pcnt	28 Pkt
1782479642	13.83 Volt	200 Pkt	87 Pcnt	27 Pkt
1782479342	13.83 Volt	210 Pkt	86 Pcnt	29 Pkt
1782479042	13.83 Volt	210 Pkt	86 Pcnt	29 Pkt
1782478742	13.83 Volt	210 Pkt	86 Pcnt	36 Pkt
1782478442	13.9 Volt	200 Pkt	85 Pcnt	38 Pkt
1782478142	13.9 Volt	200 Pkt	85 Pcnt	28 Pkt
1782477842	13.83 Volt	210 Pkt	86 Pcnt	34 Pkt
1782477542	13.83 Volt	210 Pkt	87 Pcnt	34 Pkt
1782477242	13.9 Volt	220 Pkt	87 Pcnt	33 Pkt
1782476942	13.83 Volt	240 Pkt	89 Pcnt	29 Pkt
1782476642	13.9 Volt	240 Pkt	89 Pcnt	24 Pkt
1782476342	13.83 Volt	250 Pkt	87 Pcnt	31 Pkt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)