APRS Track Direct

My position About ☰

reset

TB4AEA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB4AEA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RSSI*	Voltage*
1754520040	-81 dBm	15.65 V
1754518225	-85 dBm	15.67 V
1754516415	-83 dBm	15.67 V
1754514605	-85 dBm	15.67 V
1754512795	-84 dBm	15.69 V
1754510985	-85 dBm	15.67 V
1754509175	-85 dBm	15.67 V
1754507368	-82 dBm	15.67 V
1754505555	-83 dBm	15.67 V
1754503745	-84 dBm	15.69 V
1754501935	-83 dBm	15.67 V
1754500125	-84 dBm	15.65 V
1754498315	-84 dBm	15.69 V
1754496505	-84 dBm	15.65 V
1754494695	-82 dBm	15.69 V
1754492885	-82 dBm	15.67 V
1754491075	-81 dBm	15.67 V
1754489265	-84 dBm	15.67 V
1754488635	-81 dBm	15.67 V
1754486825	-85 dBm	15.65 V
1754485014	-82 dBm	15.67 V
1754483204	-83 dBm	15.67 V
1754481395	-81 dBm	15.67 V
1754479584	-82 dBm	15.67 V
1754477774	-83 dBm	15.69 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)