This is the latest recevied telemetry packets stored in our database for station/object WB0BBE-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753605667 | 425 | 603 | 0 | 0 | 0 |
| 1753604773 | 425 | 604 | 0 | 0 | 0 |
| 1753603878 | 425 | 605 | 0 | 0 | 0 |
| 1753602984 | 425 | 606 | 0 | 0 | 0 |
| 1753602090 | 425 | 606 | 0 | 0 | 0 |
| 1753600301 | 425 | 608 | 0 | 0 | 0 |
| 1753599406 | 425 | 609 | 0 | 0 | 0 |
| 1753598512 | 425 | 609 | 0 | 0 | 0 |
| 1753597617 | 425 | 611 | 0 | 0 | 0 |
| 1753595827 | 425 | 613 | 0 | 0 | 0 |
| 1753594933 | 425 | 613 | 0 | 0 | 0 |
| 1753594038 | 424 | 614 | 0 | 0 | 0 |
| 1753593143 | 425 | 615 | 0 | 0 | 0 |
| 1753592248 | 424 | 616 | 0 | 0 | 0 |
| 1753589563 | 425 | 619 | 0 | 0 | 0 |
| 1753585982 | 425 | 622 | 0 | 0 | 0 |
| 1753585086 | 425 | 623 | 0 | 0 | 0 |
| 1753584191 | 425 | 624 | 0 | 0 | 0 |
| 1753583295 | 425 | 625 | 0 | 0 | 0 |
| 1753582400 | 425 | 626 | 0 | 0 | 0 |
| 1753581504 | 425 | 627 | 0 | 0 | 0 |
| 1753580608 | 425 | 627 | 0 | 0 | 0 |
| 1753579713 | 425 | 628 | 0 | 0 | 0 |
| 1753578817 | 424 | 629 | 0 | 0 | 0 |
| 1753577921 | 425 | 630 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)