APRS Track Direct

My position About ☰

reset

METHOD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object METHOD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Dg10m*
1836274576	13.98 Volt	630 Pkt	110 Pkt	86 Pcnt	930 Pkts
1836274575	13.98 Volt	630 Pkt	110 Pkt	86 Pcnt	930 Pkts
1836274426	13.98 Volt	650 Pkt	120 Pkt	86 Pcnt	930 Pkts
1836274425	13.98 Volt	650 Pkt	120 Pkt	86 Pcnt	930 Pkts
1836273976	13.98 Volt	630 Pkt	100 Pkt	87 Pcnt	800 Pkts
1836273975	13.98 Volt	630 Pkt	100 Pkt	87 Pcnt	800 Pkts
1778027061	13.98 Volt	580 Pkt	110 Pkt	86 Pcnt	950 Pkts
1778027060	13.98 Volt	580 Pkt	110 Pkt	86 Pcnt	950 Pkts
1778026460	13.83 Volt	600 Pkt	120 Pkt	86 Pcnt	770 Pkts
1778026460	13.83 Volt	600 Pkt	120 Pkt	86 Pcnt	770 Pkts
1778025861	13.98 Volt	610 Pkt	130 Pkt	86 Pcnt	780 Pkts
1778025860	13.98 Volt	610 Pkt	130 Pkt	86 Pcnt	780 Pkts
1778025261	13.98 Volt	620 Pkt	140 Pkt	86 Pcnt	610 Pkts
1778025260	13.98 Volt	620 Pkt	140 Pkt	86 Pcnt	610 Pkts
1778024662	13.98 Volt	660 Pkt	140 Pkt	87 Pcnt	1050 Pkts
1778024660	13.98 Volt	660 Pkt	140 Pkt	87 Pcnt	1050 Pkts
1778024062	13.98 Volt	680 Pkt	140 Pkt	87 Pcnt	1000 Pkts
1778024060	13.98 Volt	680 Pkt	140 Pkt	87 Pcnt	1000 Pkts
1778023462	13.98 Volt	680 Pkt	140 Pkt	86 Pcnt	1140 Pkts
1778023460	13.98 Volt	680 Pkt	140 Pkt	86 Pcnt	1140 Pkts
1778022861	13.98 Volt	660 Pkt	130 Pkt	85 Pcnt	930 Pkts
1778022860	13.98 Volt	660 Pkt	130 Pkt	85 Pcnt	930 Pkts
1778022262	13.98 Volt	670 Pkt	130 Pkt	85 Pcnt	910 Pkts
1778022262	13.98 Volt	670 Pkt	130 Pkt	85 Pcnt	910 Pkts
1778021662	13.98 Volt	690 Pkt	130 Pkt	85 Pcnt	990 Pkts

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)