APRS Track Direct

My position About ☰

reset

DK0WT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DK0WT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Battery*	Rx1h*	Dg1h*	Eff1h*	Eff*
1758181482	15.01 Volt	420 Pkt	70 Pkt	68 Pcnt	81 Pcnt
1758177881	13.67 Volt	420 Pkt	90 Pkt	72 Pcnt	81 Pcnt
1758176081	13.04 Volt	420 Pkt	100 Pkt	71 Pcnt	81 Pcnt
1758174282	12.96 Volt	400 Pkt	100 Pkt	68 Pcnt	81 Pcnt
1758172482	12.96 Volt	390 Pkt	90 Pkt	66 Pcnt	81 Pcnt
1758170682	12.96 Volt	390 Pkt	110 Pkt	68 Pcnt	81 Pcnt
1758168882	12.96 Volt	380 Pkt	110 Pkt	73 Pcnt	81 Pcnt
1758167082	12.96 Volt	370 Pkt	100 Pkt	80 Pcnt	81 Pcnt
1758165282	12.96 Volt	380 Pkt	100 Pkt	78 Pcnt	81 Pcnt
1758163482	12.96 Volt	380 Pkt	90 Pkt	72 Pcnt	81 Pcnt
1758159882	12.96 Volt	340 Pkt	90 Pkt	74 Pcnt	81 Pcnt
1758158082	13.04 Volt	350 Pkt	90 Pkt	72 Pcnt	81 Pcnt
1758156283	13.04 Volt	360 Pkt	100 Pkt	72 Pcnt	81 Pcnt
1758154484	13.04 Volt	370 Pkt	100 Pkt	73 Pcnt	81 Pcnt
1758152682	13.04 Volt	360 Pkt	100 Pkt	74 Pcnt	81 Pcnt
1758150882	13.04 Volt	340 Pkt	90 Pkt	79 Pcnt	81 Pcnt
1758149085	13.04 Volt	320 Pkt	90 Pkt	73 Pcnt	81 Pcnt
1758147283	12.96 Volt	300 Pkt	80 Pkt	66 Pcnt	81 Pcnt
1758145483	13.11 Volt	340 Pkt	90 Pkt	71 Pcnt	81 Pcnt
1758143685	13.11 Volt	370 Pkt	120 Pkt	72 Pcnt	81 Pcnt
1758141883	13.11 Volt	420 Pkt	140 Pkt	78 Pcnt	81 Pcnt
1758140083	13.11 Volt	440 Pkt	150 Pkt	81 Pcnt	81 Pcnt
1758134683	13.11 Volt	440 Pkt	170 Pkt	83 Pcnt	81 Pcnt

*Used Equation Coefficients:

Battery: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)