APRS Track Direct

My position About ☰

reset

OK4AB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK4AB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatu*	Humidity*	Pressure*	Satellite*
1770397466	26.39 C	43.07 %	955.8 hPa	12
1770397436	26.4 C	43.07 %	955.8 hPa	12
1770397427	26.4 C	43.07 %	955.8 hPa	12
1770397406	26.4 C	43.07 %	955.8 hPa	12
1770397373	26.4 C	43.07 %	955.8 hPa	12
1770397367	26.4 C	43.07 %	955.8 hPa	12
1770397314	26.42 C	43.33 %	955.7 hPa	12
1770397307	26.42 C	43.33 %	955.7 hPa	12
1770397279	26.43 C	43.05 %	955.7 hPa	12
1770397253	26.43 C	43.03 %	955.7 hPa	12
1770397247	26.43 C	43.03 %	955.7 hPa	12
1770397194	26.44 C	43.05 %	955.7 hPa	12
1770397187	26.44 C	43.05 %	955.7 hPa	12
1770397179	26.44 C	43.05 %	955.7 hPa	12
1770397124	26.45 C	43.05 %	955.7 hPa	12
1770397064	26.45 C	43.05 %	955.7 hPa	12
1770397004	26.45 C	43.04 %	955.7 hPa	12
1770396944	26.46 C	43.03 %	955.7 hPa	12
1770396885	26.47 C	43.03 %	955.7 hPa	12
1770396824	26.48 C	43.05 %	955.7 hPa	12
1770396764	26.5 C	43.05 %	955.7 hPa	12
1770396705	26.51 C	43.05 %	955.7 hPa	12
1770396644	26.52 C	43.04 %	955.7 hPa	12
1770396584	26.53 C	43.05 %	955.6 hPa	12
1770396524	26.54 C	43.04 %	955.6 hPa	12

*Used Equation Coefficients:

Temperatu: 0, 0.01, 0

Humidity: 0, 0.01, 0

Pressure: 0, 0.1, 800

Battery: 0, 0.01, 0

Satellite: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)