This is the latest recevied telemetry packets stored in our database for station/object EL-PY2HGW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766227661 | 0 | 921 | 0 | 33 | 0 |
| 1766225861 | 0 | 938 | 0 | 31 | 0 |
| 1766224061 | 0 | 947 | 0 | 26 | 0 |
| 1766222261 | 0 | 913 | 0 | 60 | 0 |
| 1766199174 | 0 | 7 | 0 | 2 | 0 |
| 1766197374 | 0 | 6 | 0 | 2 | 0 |
| 1766195574 | 0 | 6 | 0 | 2 | 0 |
| 1766193774 | 0 | 18 | 0 | 8 | 0 |
| 1766191974 | 0 | 909 | 0 | 25 | 0 |
| 1766188674 | 0 | 448 | 0 | 41 | 0 |
| 1766186874 | 0 | 24 | 0 | 15 | 0 |
| 1766184775 | 0 | 872 | 0 | 73 | 0 |
| 1766182975 | 0 | 835 | 1 | 73 | 0 |
| 1766181175 | 0 | 884 | 0 | 57 | 0 |
| 1766179375 | 0 | 853 | 0 | 37 | 0 |
| 1766177575 | 0 | 12 | 0 | 3 | 0 |
| 1766175475 | 0 | 11 | 0 | 3 | 0 |
| 1766173675 | 0 | 7 | 0 | 2 | 0 |
| 1766171875 | 0 | 6 | 0 | 2 | 0 |
| 1766170075 | 0 | 7 | 1 | 4 | 0 |
| 1766168275 | 0 | 5 | 0 | 2 | 0 |
| 1766166475 | 0 | 6 | 0 | 2 | 0 |
| 1766164675 | 0 | 5 | 0 | 2 | 0 |
| 1766162875 | 0 | 6 | 0 | 2 | 0 |
| 1766161075 | 0 | 51 | 0 | 3 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)