APRS Track Direct

My position About ☰

reset

E24QND-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24QND-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1786700831	24 Pkt	8 Pkt	4 Pkt	-49 dBm	0.06 V
1786699304	0 Pkt	4 Pkt	2 Pkt	-51 dBm	0.06 V
1786697779	2 Pkt	11 Pkt	2 Pkt	-49 dBm	0.06 V
1786696253	2 Pkt	8 Pkt	1 Pkt	-49 dBm	0.06 V
1786694728	3 Pkt	8 Pkt	2 Pkt	-50 dBm	0.06 V
1786693203	1 Pkt	8 Pkt	2 Pkt	-49 dBm	0.06 V
1786691677	1 Pkt	12 Pkt	1 Pkt	-49 dBm	0.06 V
1786690152	0 Pkt	4 Pkt	2 Pkt	-49 dBm	0.06 V
1786688627	1 Pkt	8 Pkt	1 Pkt	-50 dBm	0.06 V
1786687102	1 Pkt	8 Pkt	2 Pkt	-50 dBm	0.06 V
1786685578	11 Pkt	2 Pkt	49 Pkt	-0.06 dBm	0 V
1786685577	2 Pkt	11 Pkt	2 Pkt	-49 dBm	0.06 V
1786684051	2 Pkt	8 Pkt	0 Pkt	-50 dBm	0.06 V
1786682526	2 Pkt	8 Pkt	1 Pkt	-50 dBm	0.06 V
1786681000	0 Pkt	4 Pkt	2 Pkt	-48 dBm	0.06 V
1786679475	1 Pkt	12 Pkt	2 Pkt	-49 dBm	0.06 V
1786677950	1 Pkt	8 Pkt	2 Pkt	-49 dBm	0.04 V
1786676425	4 Pkt	8 Pkt	2 Pkt	-51 dBm	0.04 V
1786674900	1 Pkt	8 Pkt	1 Pkt	-49 dBm	0.06 V
1786673375	0 Pkt	12 Pkt	2 Pkt	-49 dBm	0.06 V
1786671849	0 Pkt	4 Pkt	1 Pkt	-50 dBm	0.06 V
1786670324	1 Pkt	8 Pkt	1 Pkt	-45 dBm	0.04 V
1786668799	0 Pkt	8 Pkt	3 Pkt	-45 dBm	0.04 V
1786667274	3 Pkt	12 Pkt	1 Pkt	-49 dBm	0.06 V
1786665748	1 Pkt	8 Pkt	2 Pkt	-50 dBm	0.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)