This is the latest recevied telemetry packets stored in our database for station/object VE2WFN-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774137883 | 128 | 0 | 0 | 0 | 0 |
| 1774136377 | 126 | 0 | 0 | 0 | 0 |
| 1774134871 | 132 | 0 | 0 | 0 | 0 |
| 1774133365 | 126 | 0 | 0 | 0 | 0 |
| 1774131859 | 126 | 0 | 0 | 0 | 0 |
| 1774130353 | 129 | 0 | 0 | 0 | 0 |
| 1774128847 | 124 | 0 | 0 | 0 | 0 |
| 1774127341 | 133 | 0 | 0 | 0 | 0 |
| 1774125835 | 139 | 0 | 0 | 0 | 0 |
| 1774124741 | 140 | 0 | 0 | 0 | 0 |
| 1774123235 | 133 | 0 | 0 | 0 | 0 |
| 1774121729 | 133 | 0 | 0 | 0 | 0 |
| 1774120223 | 144 | 0 | 0 | 0 | 0 |
| 1774118717 | 139 | 0 | 0 | 0 | 0 |
| 1774117211 | 136 | 0 | 0 | 0 | 0 |
| 1774115705 | 141 | 0 | 0 | 0 | 0 |
| 1774114199 | 136 | 0 | 0 | 0 | 0 |
| 1774112693 | 152 | 0 | 0 | 0 | 0 |
| 1774111187 | 147 | 0 | 0 | 0 | 0 |
| 1774109682 | 137 | 0 | 0 | 0 | 0 |
| 1774108175 | 142 | 0 | 0 | 0 | 0 |
| 1774106669 | 146 | 0 | 0 | 0 | 0 |
| 1774105163 | 145 | 0 | 0 | 0 | 0 |
| 1774103657 | 142 | 0 | 0 | 0 | 0 |
| 1774102151 | 135 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)