This is the latest recevied telemetry packets stored in our database for station/object EL-EA3RCI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 04/14/2025 9:55:04 AM+00:00 | 0 RX Erlang | 0.94 TX Erlang | 0 RXcount/10m | 17 TXcount/10m | 0 none1 |
| 04/14/2025 9:25:04 AM+00:00 | 0 RX Erlang | 0.76 TX Erlang | 0 RXcount/10m | 38 TXcount/10m | 0 none1 |
| 04/14/2025 8:55:04 AM+00:00 | 0 RX Erlang | 0.86 TX Erlang | 0 RXcount/10m | 39 TXcount/10m | 0 none1 |
| 04/14/2025 8:25:04 AM+00:00 | 0 RX Erlang | 0.89 TX Erlang | 0 RXcount/10m | 22 TXcount/10m | 0 none1 |
| 04/14/2025 7:55:04 AM+00:00 | 0 RX Erlang | 0.85 TX Erlang | 0 RXcount/10m | 27 TXcount/10m | 0 none1 |
| 04/14/2025 7:25:04 AM+00:00 | 0 RX Erlang | 0.87 TX Erlang | 0 RXcount/10m | 34 TXcount/10m | 0 none1 |
| 04/14/2025 6:55:04 AM+00:00 | 0 RX Erlang | 0.95 TX Erlang | 0 RXcount/10m | 27 TXcount/10m | 0 none1 |
| 04/14/2025 6:25:04 AM+00:00 | 0 RX Erlang | 0.92 TX Erlang | 0 RXcount/10m | 32 TXcount/10m | 0 none1 |
| 04/14/2025 5:55:04 AM+00:00 | 0 RX Erlang | 0.73 TX Erlang | 0 RXcount/10m | 15 TXcount/10m | 0 none1 |
| 04/14/2025 5:25:04 AM+00:00 | 0 RX Erlang | 0.66 TX Erlang | 0 RXcount/10m | 24 TXcount/10m | 0 none1 |
| 04/14/2025 4:55:04 AM+00:00 | 0 RX Erlang | 0.78 TX Erlang | 0 RXcount/10m | 25 TXcount/10m | 0 none1 |
| 04/14/2025 4:25:04 AM+00:00 | 0 RX Erlang | 0.01 TX Erlang | 0 RXcount/10m | 4 TXcount/10m | 0 none1 |
| 04/14/2025 3:25:04 AM+00:00 | 0 RX Erlang | 0.01 TX Erlang | 0 RXcount/10m | 2 TXcount/10m | 0 none1 |
| 04/14/2025 2:55:04 AM+00:00 | 0 RX Erlang | 0.01 TX Erlang | 0 RXcount/10m | 2 TXcount/10m | 0 none1 |
| 04/14/2025 2:25:04 AM+00:00 | 0 RX Erlang | 0.01 TX Erlang | 0 RXcount/10m | 2 TXcount/10m | 0 none1 |
| 04/14/2025 1:55:04 AM+00:00 | 0 RX Erlang | 0.01 TX Erlang | 0 RXcount/10m | 2 TXcount/10m | 0 none1 |
| 04/14/2025 1:25:04 AM+00:00 | 0 RX Erlang | 0.01 TX Erlang | 0 RXcount/10m | 3 TXcount/10m | 0 none1 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)