This is the latest recevied telemetry packets stored in our database for station/object DL6NF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1770113742 | 993.5 hPa | 22.4 C deg | 19.7 % | 858 - | 0 C deg |
| 1770110598 | 993.5 hPa | 21.6 C deg | 19.9 % | 903 - | 0 C deg |
| 1770108647 | 993.4 hPa | 20.1 C deg | 19.8 % | 946 - | 0 C deg |
| 1770106507 | 993.5 hPa | 22.2 C deg | 20.7 % | 802 - | 0 C deg |
| 1770088531 | 995.2 hPa | 21.5 C deg | 22.1 % | 782 - | 0 C deg |
| 1770088089 | 995.4 hPa | 21.4 C deg | 22.1 % | 787 - | 0 C deg |
| 1770086297 | 995.7 hPa | 21.5 C deg | 22.1 % | 780 - | 0 C deg |
| 1770056195 | 997.2 hPa | 22.3 C deg | 22.3 % | 751 - | 0 C deg |
| 1770056195 | 997.2 hPa | 22.3 C deg | 22.3 % | 751 - | 0 C deg |
| 1770049607 | 996.8 hPa | 22.7 C deg | 22.5 % | 734 - | 0 C deg |
| 1770043017 | 996.8 hPa | 23 C deg | 22.3 % | 730 - | 0 C deg |
| 1770041580 | 996.7 hPa | 23.1 C deg | 21.8 % | 729 - | 0 C deg |
| 1770041113 | 996.8 hPa | 23.2 C deg | 21.6 % | 723 - | 0 C deg |
| 1770033597 | 997.2 hPa | 23.2 C deg | 22.3 % | 702 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)