This is the latest recevied telemetry packets stored in our database for station/object SQ7RJZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786723389 | 90 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786721580 | 89 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786719765 | 88 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786717958 | 87 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786716157 | 86 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786714356 | 85 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786712566 | 84 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786710765 | 83 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786708964 | 82 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786707162 | 81 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786705361 | 80 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786703556 | 79 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786701755 | 78 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786699952 | 77 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786698152 | 76 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786696346 | 75 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786694537 | 74 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786692729 | 73 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786690943 | 72 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786689156 | 71 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786687356 | 70 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786685550 | 69 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786683750 | 68 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786681947 | 67 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1786680146 | 66 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)