APRS Track Direct

My position About ☰

reset

LU8EJA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU8EJA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1786727091	22 Pkt	13 Pkt	2 Pkt	-55 dBm	11.89 V
1786725263	28 Pkt	15 Pkt	4 Pkt	-56 dBm	11.89 V
1786723430	27 Pkt	15 Pkt	6 Pkt	-56 dBm	11.89 V
1786721598	31 Pkt	18 Pkt	1 Pkt	-53 dBm	11.89 V
1786719765	28 Pkt	11 Pkt	0 Pkt	-53 dBm	11.89 V
1786717932	18 Pkt	24 Pkt	2 Pkt	-53 dBm	11.89 V
1786716102	60 Pkt	18 Pkt	6 Pkt	-51 dBm	11.89 V
1786714262	25 Pkt	13 Pkt	0 Pkt	-52 dBm	11.89 V
1786712431	32 Pkt	11 Pkt	0 Pkt	-52 dBm	11.92 V
1786710600	33 Pkt	7 Pkt	0 Pkt	-52 dBm	11.89 V
1786708768	17 Pkt	8 Pkt	2 Pkt	-55 dBm	11.89 V
1786706940	35 Pkt	8 Pkt	2 Pkt	-52 dBm	11.89 V
1786705104	57 Pkt	11 Pkt	3 Pkt	-51 dBm	11.89 V
1786703264	57 Pkt	6 Pkt	0 Pkt	-51 dBm	11.89 V
1786701428	18 Pkt	11 Pkt	0 Pkt	-52 dBm	11.89 V
1786699600	21 Pkt	7 Pkt	0 Pkt	-53 dBm	11.89 V
1786697773	14 Pkt	8 Pkt	3 Pkt	-51 dBm	11.89 V
1786695946	22 Pkt	8 Pkt	3 Pkt	-53 dBm	11.89 V
1786694117	21 Pkt	9 Pkt	0 Pkt	-51 dBm	11.89 V
1786692288	19 Pkt	8 Pkt	0 Pkt	-53 dBm	11.89 V
1786690461	20 Pkt	11 Pkt	0 Pkt	-52 dBm	11.89 V
1786688632	22 Pkt	7 Pkt	0 Pkt	-52 dBm	11.89 V
1786686803	24 Pkt	11 Pkt	4 Pkt	-56 dBm	11.89 V
1786684971	21 Pkt	7 Pkt	6 Pkt	-58 dBm	11.89 V
1786683142	31 Pkt	11 Pkt	3 Pkt	-59 dBm	11.89 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)