APRS Track Direct

My position About ☰

reset

G4BDW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object G4BDW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1750195974	63 Pkts	62 Pkts	47 Pkts	27 C
1750192374	60 Pkts	59 Pkts	46 Pkts	27 C
1750188775	71 Pkts	69 Pkts	47 Pkts	27 C
1750185173	92 Pkts	91 Pkts	57 Pkts	27 C
1750181573	152 Pkts	150 Pkts	80 Pkts	27 C
1750177973	103 Pkts	102 Pkts	55 Pkts	27 C
1750174373	81 Pkts	79 Pkts	48 Pkts	27 C
1750170772	80 Pkts	78 Pkts	49 Pkts	27 C
1750167173	72 Pkts	70 Pkts	58 Pkts	27 C
1750163573	57 Pkts	55 Pkts	41 Pkts	27 C
1750159973	95 Pkts	94 Pkts	59 Pkts	26 C
1750156373	73 Pkts	71 Pkts	46 Pkts	27 C
1750152773	48 Pkts	47 Pkts	38 Pkts	26 C
1750149173	69 Pkts	67 Pkts	46 Pkts	26 C
1750145573	99 Pkts	97 Pkts	47 Pkts	27 C
1750141973	169 Pkts	166 Pkts	78 Pkts	26 C
1750138373	202 Pkts	202 Pkts	64 Pkts	27 C
1750134773	172 Pkts	172 Pkts	73 Pkts	26 C
1750131173	162 Pkts	157 Pkts	74 Pkts	26 C
1750127573	154 Pkts	153 Pkts	69 Pkts	26 C
1750123973	144 Pkts	141 Pkts	59 Pkts	26 C
1750120373	129 Pkts	125 Pkts	51 Pkts	26 C
1750116773	99 Pkts	97 Pkts	54 Pkts	26 C
1750113173	76 Pkts	74 Pkts	49 Pkts	27 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)