This is the latest recevied telemetry packets stored in our database for station/object DL4ALL-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1758197765 | 974.6 hPa | 32 C deg | 33.9 % | 446 - | 0 C deg |
| 1758195965 | 974.7 hPa | 30.3 C deg | 36 % | 451 - | 0 C deg |
| 1758194165 | 974.7 hPa | 30.4 C deg | 35.5 % | 460 - | 0 C deg |
| 1758192365 | 974.7 hPa | 30.2 C deg | 35.3 % | 457 - | 0 C deg |
| 1758190564 | 974.9 hPa | 30 C deg | 35.5 % | 457 - | 0 C deg |
| 1758188764 | 974.8 hPa | 29.9 C deg | 35.2 % | 445 - | 0 C deg |
| 1758186964 | 974.7 hPa | 29.8 C deg | 35.2 % | 429 - | 0 C deg |
| 1758185164 | 974.5 hPa | 29.7 C deg | 34.3 % | 420 - | 0 C deg |
| 1758183364 | 974.5 hPa | 29.8 C deg | 34.2 % | 392 - | 0 C deg |
| 1758181564 | 974.4 hPa | 29.6 C deg | 34.4 % | 367 - | 0 C deg |
| 1758179764 | 974.3 hPa | 29.5 C deg | 34 % | 366 - | 0 C deg |
| 1758177964 | 974.2 hPa | 29.8 C deg | 33.5 % | 357 - | 0 C deg |
| 1758176164 | 974 hPa | 29.8 C deg | 33.4 % | 346 - | 0 C deg |
| 1758174364 | 973.7 hPa | 29.8 C deg | 33.5 % | 337 - | 0 C deg |
| 1758172564 | 973.6 hPa | 29.9 C deg | 33.3 % | 328 - | 0 C deg |
| 1758170763 | 973.3 hPa | 30 C deg | 33.3 % | 326 - | 0 C deg |
| 1758136562 | 973.5 hPa | 31.1 C deg | 32 % | 420 - | 0 C deg |
| 1758134762 | 973.4 hPa | 31 C deg | 32.1 % | 416 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)