This is the latest recevied telemetry packets stored in our database for station/object F5OPV-13z. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Tint* | RHint* | Lum.* | Vent* | Value5* |
|---|---|---|---|---|---|
| 1764266060 | 23.21 C | 46 % | 11 % | 48 kmh | 0 |
| 1764265446 | 23.23 C | 46 % | 11 % | 48 kmh | 0 |
| 1764264832 | 23.23 C | 45 % | 11 % | 48 kmh | 0 |
| 1764264219 | 23.24 C | 46 % | 11 % | 48 kmh | 0 |
| 1764263605 | 23.32 C | 45 % | 11 % | 48 kmh | 0 |
| 1764262991 | 23.12 C | 46 % | 11 % | 48 kmh | 0 |
| 1764262378 | 23.13 C | 46 % | 11 % | 48 kmh | 0 |
| 1764261764 | 23.1 C | 46 % | 11 % | 48 kmh | 0 |
| 1764261151 | 23.07 C | 46 % | 11 % | 48 kmh | 0 |
| 1764260537 | 23.11 C | 47 % | 11 % | 48 kmh | 0 |
| 1764259923 | 23 C | 47 % | 11 % | 48 kmh | 0 |
| 1764259310 | 22.86 C | 46 % | 11 % | 48 kmh | 0 |
| 1764258082 | 22.8 C | 46 % | 11 % | 48 kmh | 0 |
| 1764257469 | 22.79 C | 46 % | 12 % | 48 kmh | 0 |
| 1764256855 | 22.72 C | 47 % | 11 % | 48 kmh | 0 |
| 1764256241 | 22.77 C | 46 % | 11 % | 48 kmh | 0 |
| 1764255628 | 22.74 C | 47 % | 12 % | 48 kmh | 0 |
| 1764255015 | 22.82 C | 46 % | 12 % | 48 kmh | 0 |
| 1764254404 | 22.84 C | 46 % | 12 % | 48 kmh | 0 |
| 1764253792 | 22.69 C | 46 % | 12 % | 48 kmh | 0 |
| 1764253181 | 22.73 C | 46 % | 11 % | 48 kmh | 0 |
| 1764252570 | 22.55 C | 46 % | 12 % | 48 kmh | 0 |
| 1764251958 | 22.52 C | 46 % | 12 % | 48 kmh | 0 |
| 1764251347 | 22.32 C | 46 % | 12 % | 48 kmh | 0 |
| 1764250433 | 22.55 C | 45 % | 12 % | 48 kmh | 0 |
*Used Equation Coefficients:
Tint: 0, 1, 0
RHint: 0, 1, 0
Lum.: 0, 1, 0
Vent: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)