This is the latest recevied telemetry packets stored in our database for station/object W4KEL-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794914780 | 13.42 | 10.96 | 0 | 0 | 0 |
| 1794912738 | 13.45 | 10.96 | 0 | 0 | 0 |
| 1794910698 | 13.42 | 10.96 | 0 | 0 | 0 |
| 1794908657 | 13.42 | 10.96 | 0 | 0 | 0 |
| 1794906617 | 13.42 | 10.96 | 0 | 0 | 0 |
| 1794902536 | 13.45 | 10.96 | 0 | 0 | 0 |
| 1794900496 | 13.45 | 10.96 | 0 | 0 | 0 |
| 1794898456 | 13.45 | 10.96 | 0 | 0 | 0 |
| 1794894375 | 13.45 | 10.96 | 0 | 0 | 0 |
| 1794892334 | 13.42 | 11.45 | 0 | 0 | 0 |
| 1794890294 | 13.42 | 11.94 | 0 | 0 | 0 |
| 1794888253 | 13.42 | 12.92 | 0 | 0 | 0 |
| 1794886213 | 13.45 | 13.4 | 0 | 0 | 0 |
| 1794884173 | 13.42 | 14.38 | 0 | 0 | 0 |
| 1794882133 | 13.42 | 14.87 | 0 | 0 | 0 |
| 1794880093 | 13.42 | 15.36 | 0 | 0 | 0 |
| 1794878052 | 13.42 | 16.83 | 0 | 0 | 0 |
| 1794876012 | 13.42 | 17.81 | 0 | 0 | 0 |
| 1794873971 | 13.42 | 18.78 | 0 | 0 | 0 |
| 1794871930 | 13.45 | 19.76 | 0 | 0 | 0 |
| 1794869890 | 13.42 | 20.74 | 0 | 0 | 0 |
| 1794867848 | 13.42 | 22.21 | 0 | 0 | 0 |
| 1794865807 | 13.42 | 23.67 | 0 | 0 | 0 |
| 1794863765 | 13.51 | 23.18 | 0 | 0 | 0 |
| 1794861722 | 13.6 | 22.7 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)