This is the latest recevied telemetry packets stored in our database for station/object TK5EP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Temp* | Hum* | Poids* | Value5* |
|---|---|---|---|---|---|
| 1792162404 | 4.19 V | 25 C | 69 % | 17.75 kg | 210 |
| 1792161567 | 4.19 V | 25 C | 68.5 % | 17.75 kg | 223 |
| 1792159894 | 4.17 V | 25 C | 71.5 % | 17.75 kg | 218 |
| 1792159057 | 4.17 V | 25 C | 70.5 % | 17.75 kg | 211 |
| 1792158175 | 4.19 V | 26.5 C | 67 % | 17.75 kg | 202 |
| 1792157338 | 4.17 V | 24.5 C | 70.5 % | 17.75 kg | 207 |
| 1792155665 | 4.19 V | 25.5 C | 68 % | 17.75 kg | 202 |
| 1792154825 | 4.17 V | 27.5 C | 63.5 % | 17.75 kg | 214 |
| 1792153985 | 4.17 V | 29.5 C | 56.5 % | 17.75 kg | 223 |
| 1792153099 | 4.17 V | 30 C | 56.5 % | 17.75 kg | 205 |
| 1792151414 | 4.17 V | 30.5 C | 53.5 % | 17.75 kg | 171 |
| 1792150574 | 4.17 V | 29.5 C | 59 % | 17.75 kg | 162 |
| 1792148897 | 4.19 V | 25 C | 68 % | 17.75 kg | 138 |
| 1792147175 | 4.17 V | 27.5 C | 61 % | 17.75 kg | 112 |
| 1792146336 | 4.17 V | 27 C | 61 % | 17.75 kg | 89 |
| 1792145495 | 4.17 V | 29 C | 57.5 % | 17.75 kg | 94 |
| 1792144652 | 4.17 V | 32 C | 53 % | 17.75 kg | 139 |
| 1792143810 | 4.17 V | 29 C | 64 % | 17.75 kg | 211 |
| 1792142088 | 4.17 V | 24.5 C | 79 % | 17.75 kg | 237 |
| 1792141251 | 4.17 V | 22.5 C | 85 % | 17.75 kg | 249 |
| 1792138742 | 4.19 V | 21.5 C | 95 % | 18 kg | 7 |
| 1792137861 | 4.17 V | 20.5 C | 97.5 % | 18 kg | 24 |
| 1792137027 | 4.17 V | 19.5 C | 98.5 % | 18 kg | 34 |
| 1792136193 | 4.17 V | 19 C | 99 % | 18 kg | 34 |
| 1792135360 | 4.17 V | 18 C | 99 % | 18 kg | 32 |
*Used Equation Coefficients:
Vbat: 0, 0.008, 2.5
Temp: 0, 0.5, -40
Hum: 0, 0.5, 0
Poids: 0, 0.25, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)