This is the latest recevied telemetry packets stored in our database for station/object VK2MCA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764264846 | 425 | 612 | 0 | 0 | 0 |
| 1764263050 | 426 | 612 | 0 | 0 | 0 |
| 1764261253 | 425 | 613 | 0 | 0 | 0 |
| 1764259459 | 425 | 613 | 0 | 0 | 0 |
| 1764257656 | 426 | 614 | 0 | 0 | 0 |
| 1764255862 | 426 | 614 | 0 | 0 | 0 |
| 1764254065 | 426 | 617 | 0 | 0 | 0 |
| 1764252269 | 426 | 615 | 0 | 0 | 0 |
| 1764250468 | 426 | 616 | 0 | 0 | 0 |
| 1764248674 | 427 | 616 | 0 | 0 | 0 |
| 1764246876 | 427 | 617 | 0 | 0 | 0 |
| 1764245080 | 427 | 618 | 0 | 0 | 0 |
| 1764243285 | 427 | 618 | 0 | 0 | 0 |
| 1764241484 | 428 | 619 | 0 | 0 | 0 |
| 1764239687 | 428 | 619 | 0 | 0 | 0 |
| 1764237891 | 428 | 620 | 0 | 0 | 0 |
| 1764236092 | 429 | 621 | 0 | 0 | 0 |
| 1764234294 | 429 | 621 | 0 | 0 | 0 |
| 1764232496 | 429 | 621 | 0 | 0 | 0 |
| 1764230700 | 429 | 622 | 0 | 0 | 0 |
| 1764228901 | 429 | 622 | 0 | 0 | 0 |
| 1764227108 | 429 | 622 | 0 | 0 | 0 |
| 1764221711 | 430 | 623 | 0 | 0 | 0 |
| 1764216320 | 432 | 623 | 0 | 0 | 0 |
| 1764214521 | 431 | 624 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)