This is the latest recevied telemetry packets stored in our database for station/object DL7MU-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766248757 | 16 Nr | 13.77 Vdc | 0 | 0 | 0 |
| 1766248672 | 16 Nr | 13.8 Vdc | 0 | 0 | 0 |
| 1766248647 | 17 Nr | 13.77 Vdc | 0 | 0 | 0 |
| 1766248632 | 17 Nr | 13.82 Vdc | 0 | 0 | 0 |
| 1766248607 | 17 Nr | 13.77 Vdc | 0 | 0 | 0 |
| 1766248597 | 17 Nr | 13.82 Vdc | 0 | 0 | 0 |
| 1766248587 | 17 Nr | 13.82 Vdc | 0 | 0 | 0 |
| 1766248577 | 17 Nr | 13.78 Vdc | 0 | 0 | 0 |
| 1766248567 | 17 Nr | 13.84 Vdc | 0 | 0 | 0 |
| 1766248522 | 17 Nr | 13.79 Vdc | 0 | 0 | 0 |
| 1766248507 | 17 Nr | 13.78 Vdc | 0 | 0 | 0 |
| 1766248497 | 17 Nr | 13.82 Vdc | 0 | 0 | 0 |
| 1766248477 | 17 Nr | 13.82 Vdc | 0 | 0 | 0 |
| 1766248467 | 17 Nr | 13.82 Vdc | 0 | 0 | 0 |
| 1766248457 | 17 Nr | 13.79 Vdc | 0 | 0 | 0 |
| 1766248447 | 17 Nr | 13.82 Vdc | 0 | 0 | 0 |
| 1766248437 | 17 Nr | 13.79 Vdc | 0 | 0 | 0 |
| 1766248427 | 17 Nr | 13.8 Vdc | 0 | 0 | 0 |
| 1766248402 | 17 Nr | 13.87 Vdc | 0 | 0 | 0 |
| 1766248372 | 17 Nr | 13.79 Vdc | 0 | 0 | 0 |
| 1766248357 | 17 Nr | 13.77 Vdc | 0 | 0 | 0 |
| 1766248342 | 17 Nr | 13.82 Vdc | 0 | 0 | 0 |
| 1766248327 | 17 Nr | 13.77 Vdc | 0 | 0 | 0 |
| 1766248312 | 17 Nr | 13.79 Vdc | 0 | 0 | 0 |
| 1766248297 | 17 Nr | 13.8 Vdc | 0 | 0 | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)