This is the latest recevied telemetry packets stored in our database for station/object REDSPR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753776460 | 117 | 1 | 9 | 13 | 113 |
| 1753776161 | 118 | 1 | 9 | 13 | 113 |
| 1753775862 | 118 | 1 | 10 | 13 | 113 |
| 1753775561 | 118 | 1 | 9 | 13 | 113 |
| 1753775260 | 117 | 1 | 9 | 13 | 113 |
| 1753774961 | 118 | 1 | 9 | 13 | 113 |
| 1753774661 | 116 | 1 | 9 | 13 | 113 |
| 1753774361 | 118 | 1 | 9 | 13 | 113 |
| 1753774060 | 116 | 1 | 9 | 13 | 113 |
| 1753773761 | 118 | 1 | 9 | 13 | 113 |
| 1753773461 | 117 | 1 | 9 | 13 | 113 |
| 1753773161 | 118 | 1 | 9 | 13 | 113 |
| 1753772862 | 117 | 1 | 9 | 13 | 113 |
| 1753772561 | 118 | 1 | 9 | 13 | 113 |
| 1753772261 | 117 | 1 | 9 | 13 | 113 |
| 1753771961 | 118 | 1 | 9 | 13 | 113 |
| 1753771663 | 118 | 1 | 9 | 13 | 113 |
| 1753771361 | 118 | 1 | 9 | 13 | 113 |
| 1753771061 | 117 | 1 | 9 | 13 | 113 |
| 1753770761 | 118 | 1 | 9 | 13 | 113 |
| 1753770462 | 117 | 1 | 9 | 13 | 113 |
| 1753770160 | 118 | 1 | 9 | 13 | 113 |
| 1753769861 | 117 | 0 | 9 | 13 | 113 |
| 1753769260 | 117 | 1 | 9 | 13 | 113 |
| 1753768962 | 118 | 1 | 9 | 13 | 113 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)