APRS Track Direct

My position About ☰

reset

KL7AA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KL7AA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	DgR1h*
1774157018	13.8 Volt	60 Pkt	50 Pkt	63 Pcnt	88.89 Pcnt
1774156775	13.8 Volt	60 Pkt	50 Pkt	65 Pcnt	82.35 Pcnt
1774156418	13.8 Volt	60 Pkt	50 Pkt	63 Pcnt	82.09 Pcnt
1774156172	13.8 Volt	70 Pkt	50 Pkt	66 Pcnt	78.87 Pcnt
1774155818	13.8 Volt	70 Pkt	50 Pkt	66 Pcnt	77.78 Pcnt
1774155518	13.8 Volt	70 Pkt	50 Pkt	70 Pcnt	73.33 Pcnt
1774155218	13.8 Volt	80 Pkt	60 Pkt	68 Pcnt	74.39 Pcnt
1774154918	13.8 Volt	80 Pkt	60 Pkt	69 Pcnt	72.41 Pcnt
1774154619	13.8 Volt	80 Pkt	60 Pkt	69 Pcnt	72.41 Pcnt
1774154394	13.8 Volt	90 Pkt	60 Pkt	70 Pcnt	71.74 Pcnt
1774154018	13.8 Volt	90 Pkt	60 Pkt	68 Pcnt	71.28 Pcnt
1774153722	13.8 Volt	90 Pkt	60 Pkt	68 Pcnt	72.34 Pcnt
1774153418	13.8 Volt	90 Pkt	70 Pkt	68 Pcnt	73.2 Pcnt
1774153118	13.8 Volt	100 Pkt	70 Pkt	70 Pcnt	73.53 Pcnt
1774152818	13.8 Volt	100 Pkt	70 Pkt	70 Pcnt	74.76 Pcnt
1774152518	13.8 Volt	100 Pkt	70 Pkt	72 Pcnt	75.96 Pcnt
1774152248	13.8 Volt	100 Pkt	70 Pkt	72 Pcnt	76.7 Pcnt
1774151918	13.8 Volt	100 Pkt	70 Pkt	71 Pcnt	76.24 Pcnt
1774151318	13.8 Volt	100 Pkt	70 Pkt	77 Pcnt	71.29 Pcnt
1774151018	13.8 Volt	90 Pkt	60 Pkt	77 Pcnt	69.7 Pcnt
1774150719	13.8 Volt	100 Pkt	60 Pkt	79 Pcnt	67.33 Pcnt
1774150418	13.8 Volt	100 Pkt	60 Pkt	81 Pcnt	67 Pcnt
1774150118	13.8 Volt	100 Pkt	60 Pkt	82 Pcnt	61.76 Pcnt
1774149546	13.8 Volt	90 Pkt	50 Pkt	81 Pcnt	61.46 Pcnt
1774149218	13.8 Volt	90 Pkt	50 Pkt	81 Pcnt	58.95 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

DgR1h: 0, 0.001, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)