This is the latest recevied telemetry packets stored in our database for station/object TA3WI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1764155933 | 14 Pkt | 0 Pkt | 1 Pkt | -65 dBm | 0 V |
| 1764155203 | 16 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0 V |
| 1764154473 | 11 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 0 V |
| 1764153743 | 7 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1764153013 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
| 1764152283 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 0 V |
| 1764151553 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 0 V |
| 1764150823 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 0 V |
| 1764150093 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0 V |
| 1764149363 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
| 1764148633 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
| 1764147903 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 0 V |
| 1764147173 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 V |
| 1764146443 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 V |
| 1764145713 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 V |
| 1764144983 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 V |
| 1764144253 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 0 V |
| 1764143523 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 V |
| 1764142793 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 0 V |
| 1764142063 | 0 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 0 V |
| 1764141333 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 V |
| 1764140607 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 V |
| 1764139873 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 0 V |
| 1764139143 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)