This is the latest recevied telemetry packets stored in our database for station/object E20TWR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1836274610 | 20 Pkt | 2 Pkt | 1 Pkt | -18 dBm | 58 % |
| 1836274485 | 15 Pkt | 4 Pkt | 0 Pkt | -14 dBm | 57 % |
| 1836273984 | 0 Pkt | 0 Pkt | 0 Pkt | -15 dBm | 57 % |
| 1766198634 | 5 Pkt | 11 Pkt | 1 Pkt | -18 dBm | 51 % |
| 1766198009 | 11 Pkt | 18 Pkt | 1 Pkt | -18 dBm | 51 % |
| 1766197383 | 9 Pkt | 16 Pkt | 3 Pkt | -17 dBm | 51 % |
| 1766196757 | 11 Pkt | 13 Pkt | 3 Pkt | -18 dBm | 50 % |
| 1766196131 | 12 Pkt | 16 Pkt | 3 Pkt | -17 dBm | 50 % |
| 1766195505 | 12 Pkt | 15 Pkt | 2 Pkt | -17 dBm | 50 % |
| 1766194880 | 5 Pkt | 8 Pkt | 0 Pkt | -17 dBm | 49 % |
| 1766194254 | 15 Pkt | 15 Pkt | 1 Pkt | -16 dBm | 48 % |
| 1766193628 | 12 Pkt | 15 Pkt | 2 Pkt | -17 dBm | 47 % |
| 1766193001 | 19 Pkt | 15 Pkt | 2 Pkt | -17 dBm | 46 % |
| 1766192375 | 14 Pkt | 17 Pkt | 5 Pkt | -17 dBm | 45 % |
| 1766191749 | 11 Pkt | 17 Pkt | 6 Pkt | -18 dBm | 44 % |
| 1766191123 | 5 Pkt | 12 Pkt | 4 Pkt | -17 dBm | 38 % |
| 1766190498 | 9 Pkt | 17 Pkt | 1 Pkt | -17 dBm | 40 % |
| 1766189871 | 21 Pkt | 16 Pkt | 7 Pkt | -18 dBm | 35 % |
| 1766189245 | 4 Pkt | 12 Pkt | 3 Pkt | -17 dBm | 32 % |
| 1766188620 | 15 Pkt | 12 Pkt | 6 Pkt | -17 dBm | 28 % |
| 1766187994 | 0 Pkt | 0 Pkt | 0 Pkt | -18 dBm | 20 % |
| 1766187296 | 4 Pkt | 11 Pkt | 3 Pkt | -18 dBm | 9 % |
| 1766186670 | 12 Pkt | 11 Pkt | 4 Pkt | -18 dBm | 2 % |
| 1766186044 | 12 Pkt | 11 Pkt | 4 Pkt | -18 dBm | 0 % |
| 1766185419 | 14 Pkt | 9 Pkt | 2 Pkt | -18 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)