This is the latest recevied telemetry packets stored in our database for station/object VK2TBL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791771361 | 960 Count | 958 Count | 783 Count | 4.28 VDC | 0.14 VDC |
| 1791769529 | 946 Count | 939 Count | 770 Count | 4.24 VDC | 0.14 VDC |
| 1791767726 | 925 Count | 909 Count | 750 Count | 4.23 VDC | 0.14 VDC |
| 1791765923 | 911 Count | 895 Count | 737 Count | 4.23 VDC | 0.14 VDC |
| 1791764119 | 908 Count | 893 Count | 735 Count | 4.26 VDC | 0.14 VDC |
| 1791762316 | 872 Count | 833 Count | 700 Count | 4.24 VDC | 0.14 VDC |
| 1791760513 | 869 Count | 831 Count | 698 Count | 4.27 VDC | 0.14 VDC |
| 1791758710 | 866 Count | 829 Count | 696 Count | 4.26 VDC | 0.14 VDC |
| 1791756906 | 863 Count | 827 Count | 694 Count | 4.3 VDC | 0.14 VDC |
| 1791755103 | 860 Count | 825 Count | 692 Count | 4.26 VDC | 0.14 VDC |
| 1791753301 | 857 Count | 823 Count | 690 Count | 4.27 VDC | 0.14 VDC |
| 1791751497 | 854 Count | 821 Count | 688 Count | 4.24 VDC | 0.14 VDC |
| 1791749694 | 851 Count | 819 Count | 686 Count | 4.24 VDC | 0.14 VDC |
| 1791747890 | 848 Count | 817 Count | 684 Count | 4.25 VDC | 0.14 VDC |
| 1791746087 | 845 Count | 815 Count | 682 Count | 4.25 VDC | 0.14 VDC |
| 1791744284 | 842 Count | 813 Count | 680 Count | 4.28 VDC | 0.14 VDC |
| 1791742481 | 839 Count | 811 Count | 678 Count | 4.25 VDC | 0.14 VDC |
| 1791740678 | 836 Count | 809 Count | 676 Count | 4.26 VDC | 0.14 VDC |
| 1791738874 | 833 Count | 807 Count | 674 Count | 4.3 VDC | 0.14 VDC |
| 1791737071 | 830 Count | 805 Count | 672 Count | 4.24 VDC | 0.14 VDC |
| 1791735268 | 827 Count | 803 Count | 670 Count | 4.27 VDC | 0.14 VDC |
| 1791733465 | 824 Count | 801 Count | 668 Count | 4.27 VDC | 0.14 VDC |
| 1791731661 | 821 Count | 799 Count | 666 Count | 4.23 VDC | 0.14 VDC |
| 1791729858 | 818 Count | 797 Count | 664 Count | 4.23 VDC | 0.14 VDC |
| 1791728129 | 811 Count | 795 Count | 662 Count | 4.26 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)