This is the latest recevied telemetry packets stored in our database for station/object IR2DF. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | DgR* | Eff1h* |
|---|---|---|---|---|---|
| 1792140280 | 31 Pkt | 200 Pkt | 8 Pkt | 6.95 Pcnt | 68 Pcnt |
| 1792139980 | 34 Pkt | 200 Pkt | 8 Pkt | 6.95 Pcnt | 67 Pcnt |
| 1792139680 | 31 Pkt | 200 Pkt | 3 Pkt | 6.95 Pcnt | 66 Pcnt |
| 1792139380 | 31 Pkt | 200 Pkt | 8 Pkt | 6.95 Pcnt | 65 Pcnt |
| 1792139080 | 35 Pkt | 200 Pkt | 8 Pkt | 6.95 Pcnt | 63 Pcnt |
| 1792138780 | 43 Pkt | 200 Pkt | 3 Pkt | 6.95 Pcnt | 61 Pcnt |
| 1792138480 | 34 Pkt | 190 Pkt | 8 Pkt | 6.95 Pcnt | 60 Pcnt |
| 1792138180 | 23 Pkt | 190 Pkt | 8 Pkt | 6.95 Pcnt | 60 Pcnt |
| 1792137880 | 25 Pkt | 200 Pkt | 4 Pkt | 6.95 Pcnt | 61 Pcnt |
| 1792137580 | 39 Pkt | 210 Pkt | 10 Pkt | 6.95 Pcnt | 61 Pcnt |
| 1792137280 | 35 Pkt | 200 Pkt | 9 Pkt | 6.95 Pcnt | 60 Pcnt |
| 1792136980 | 26 Pkt | 210 Pkt | 6 Pkt | 6.95 Pcnt | 62 Pcnt |
| 1792136680 | 28 Pkt | 210 Pkt | 9 Pkt | 6.95 Pcnt | 63 Pcnt |
| 1792136380 | 37 Pkt | 210 Pkt | 8 Pkt | 6.95 Pcnt | 64 Pcnt |
| 1792136080 | 26 Pkt | 220 Pkt | 3 Pkt | 6.94 Pcnt | 66 Pcnt |
| 1792135780 | 24 Pkt | 230 Pkt | 7 Pkt | 6.94 Pcnt | 67 Pcnt |
| 1792135480 | 30 Pkt | 250 Pkt | 6 Pkt | 6.94 Pcnt | 68 Pcnt |
| 1792135180 | 40 Pkt | 260 Pkt | 2 Pkt | 6.94 Pcnt | 68 Pcnt |
| 1792134880 | 44 Pkt | 260 Pkt | 8 Pkt | 6.94 Pcnt | 69 Pcnt |
| 1792134580 | 39 Pkt | 260 Pkt | 9 Pkt | 6.94 Pcnt | 69 Pcnt |
| 1792134280 | 30 Pkt | 250 Pkt | 5 Pkt | 6.94 Pcnt | 69 Pcnt |
| 1792133980 | 40 Pkt | 240 Pkt | 7 Pkt | 6.94 Pcnt | 70 Pcnt |
| 1792133680 | 41 Pkt | 230 Pkt | 7 Pkt | 6.94 Pcnt | 72 Pcnt |
| 1792133380 | 28 Pkt | 240 Pkt | 3 Pkt | 6.94 Pcnt | 72 Pcnt |
| 1792133080 | 42 Pkt | 240 Pkt | 8 Pkt | 6.94 Pcnt | 73 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)