This is the latest recevied telemetry packets stored in our database for station/object W5QZ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764231308 | 3848 | 0 | 115 | 1026 | 4840 |
| 1764231170 | 3837 | 0 | 116 | 1018 | 4713 |
| 1764231029 | 3848 | 0 | 115 | 1012 | 4579 |
| 1764230891 | 3848 | 0 | 127 | 1006 | 4445 |
| 1764230752 | 3848 | 0 | 129 | 1003 | 4335 |
| 1764230621 | 3840 | 0 | 140 | 1000 | 4221 |
| 1764230482 | 3803 | 0 | 161 | 999 | 4110 |
| 1764230342 | 3840 | 0 | 194 | 1001 | 3995 |
| 1764230204 | 3816 | 0 | 223 | 996 | 3867 |
| 1764230065 | 3804 | 0 | 225 | 987 | 3749 |
| 1764229927 | 3808 | 0 | 225 | 977 | 3642 |
| 1764229788 | 3808 | 0 | 223 | 967 | 3546 |
| 1764229650 | 3808 | 0 | 223 | 959 | 3444 |
| 1764229511 | 3808 | 0 | 222 | 950 | 3332 |
| 1764229372 | 3800 | 0 | 222 | 942 | 3211 |
| 1764229233 | 3800 | 0 | 223 | 936 | 3079 |
| 1764229094 | 3800 | 0 | 221 | 930 | 2956 |
| 1764228955 | 3800 | 0 | 224 | 928 | 2844 |
| 1764228817 | 3800 | 0 | 227 | 924 | 2733 |
| 1764228679 | 3808 | 0 | 227 | 921 | 2636 |
| 1764228541 | 3781 | 0 | 227 | 918 | 2537 |
| 1764228403 | 3816 | 0 | 221 | 917 | 2434 |
| 1764228264 | 3816 | 0 | 222 | 919 | 2338 |
| 1764228125 | 3824 | 0 | 223 | 920 | 2247 |
| 1764227986 | 3832 | 0 | 222 | 925 | 2163 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)