APRS Track Direct

My position About ☰

reset

OK2VOP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK2VOP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1836274350	0.09 Rx Erlang	0 Tx Erlang	76 count/10m	8 count/10m	1 count/10m
1836273899	0.12 Rx Erlang	0.01 Tx Erlang	90 count/10m	10 count/10m	2 count/10m
1762332726	0.08 Rx Erlang	0 Tx Erlang	65 count/10m	7 count/10m	1 count/10m
1762331526	0.09 Rx Erlang	0.01 Tx Erlang	72 count/10m	7 count/10m	2 count/10m
1762330326	0.08 Rx Erlang	0.01 Tx Erlang	70 count/10m	8 count/10m	2 count/10m
1762329126	0.08 Rx Erlang	0.01 Tx Erlang	71 count/10m	8 count/10m	1 count/10m
1762327926	0.09 Rx Erlang	0.01 Tx Erlang	64 count/10m	9 count/10m	2 count/10m
1762326726	0.08 Rx Erlang	0.01 Tx Erlang	71 count/10m	10 count/10m	2 count/10m
1762325526	0.1 Rx Erlang	0 Tx Erlang	77 count/10m	11 count/10m	2 count/10m
1762324326	0.09 Rx Erlang	0.01 Tx Erlang	73 count/10m	10 count/10m	2 count/10m
1762323126	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	1 count/10m	2 count/10m
1762321926	0.02 Rx Erlang	0 Tx Erlang	17 count/10m	0 count/10m	1 count/10m
1762320726	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	1 count/10m	2 count/10m
1762319526	0.04 Rx Erlang	0.01 Tx Erlang	40 count/10m	3 count/10m	1 count/10m
1762318326	0.06 Rx Erlang	0 Tx Erlang	46 count/10m	3 count/10m	1 count/10m
1762317126	0.05 Rx Erlang	0.01 Tx Erlang	33 count/10m	1 count/10m	2 count/10m
1762315926	0.07 Rx Erlang	0 Tx Erlang	49 count/10m	3 count/10m	1 count/10m
1762314726	0.07 Rx Erlang	0 Tx Erlang	52 count/10m	5 count/10m	1 count/10m
1762313526	0.07 Rx Erlang	0.01 Tx Erlang	52 count/10m	8 count/10m	2 count/10m
1762312326	0.06 Rx Erlang	0 Tx Erlang	46 count/10m	5 count/10m	1 count/10m
1762311126	0.07 Rx Erlang	0 Tx Erlang	58 count/10m	8 count/10m	1 count/10m
1762309926	0.08 Rx Erlang	0.01 Tx Erlang	61 count/10m	10 count/10m	2 count/10m
1762308726	0.07 Rx Erlang	0 Tx Erlang	66 count/10m	7 count/10m	1 count/10m
1762307526	0.06 Rx Erlang	0 Tx Erlang	54 count/10m	6 count/10m	1 count/10m
1762306326	0.08 Rx Erlang	0.01 Tx Erlang	60 count/10m	11 count/10m	2 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)