APRS Track Direct

☰

reset

IZ4GWE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ4GWE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1792156661	102 Pkt	700 Pkt	1 Pkt	0.19 Pcnt	71 Pcnt
1792156361	94 Pkt	700 Pkt	0 Pkt	0.19 Pcnt	71 Pcnt
1792156060	99 Pkt	700 Pkt	1 Pkt	0.19 Pcnt	71 Pcnt
1792155760	104 Pkt	700 Pkt	5 Pkt	0.19 Pcnt	71 Pcnt
1792155460	120 Pkt	720 Pkt	6 Pkt	0.19 Pcnt	71 Pcnt
1792155159	123 Pkt	740 Pkt	3 Pkt	0.19 Pcnt	71 Pcnt
1792154859	126 Pkt	750 Pkt	3 Pkt	0.19 Pcnt	71 Pcnt
1792154559	136 Pkt	770 Pkt	3 Pkt	0.19 Pcnt	71 Pcnt
1792154259	125 Pkt	780 Pkt	1 Pkt	0.19 Pcnt	71 Pcnt
1792153958	98 Pkt	790 Pkt	0 Pkt	0.19 Pcnt	71 Pcnt
1792153658	105 Pkt	810 Pkt	0 Pkt	0.19 Pcnt	71 Pcnt
1792153358	99 Pkt	820 Pkt	0 Pkt	0.19 Pcnt	71 Pcnt
1792152757	100 Pkt	820 Pkt	0 Pkt	0.19 Pcnt	71 Pcnt
1792152457	121 Pkt	840 Pkt	0 Pkt	0.19 Pcnt	71 Pcnt
1792152157	134 Pkt	860 Pkt	0 Pkt	0.19 Pcnt	71 Pcnt
1792151856	153 Pkt	860 Pkt	0 Pkt	0.19 Pcnt	71 Pcnt
1792151556	152 Pkt	830 Pkt	0 Pkt	0.19 Pcnt	71 Pcnt
1792151256	147 Pkt	820 Pkt	1 Pkt	0.19 Pcnt	71 Pcnt
1792150955	153 Pkt	800 Pkt	3 Pkt	0.19 Pcnt	71 Pcnt
1792150655	153 Pkt	800 Pkt	5 Pkt	0.19 Pcnt	71 Pcnt
1792150355	122 Pkt	780 Pkt	5 Pkt	0.19 Pcnt	71 Pcnt
1792150055	120 Pkt	790 Pkt	2 Pkt	0.19 Pcnt	71 Pcnt
1792149754	103 Pkt	780 Pkt	3 Pkt	0.19 Pcnt	71 Pcnt
1792149454	111 Pkt	790 Pkt	3 Pkt	0.19 Pcnt	71 Pcnt
1792149154	139 Pkt	790 Pkt	4 Pkt	0.19 Pcnt	71 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Maintained by UW0WU-1, based on APRS Track Direct