This is the latest recevied telemetry packets stored in our database for station/object IK5FKA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762310485 | 21 Pkt/10m | 21 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1762309285 | 11 Pkt/10m | 11 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1762308085 | 14 Pkt/10m | 14 Pkt/10m | 4.86 Volt | 0 | 0 |
| 1762306884 | 11 Pkt/10m | 11 Pkt/10m | 4.86 Volt | 0 | 0 |
| 1762305684 | 12 Pkt/10m | 11 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1762304484 | 9 Pkt/10m | 9 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1762303283 | 13 Pkt/10m | 13 Pkt/10m | 4.88 Volt | 0 | 0 |
| 1762302083 | 10 Pkt/10m | 10 Pkt/10m | 4.88 Volt | 0 | 0 |
| 1762300882 | 12 Pkt/10m | 12 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1762299682 | 18 Pkt/10m | 18 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1762298482 | 12 Pkt/10m | 11 Pkt/10m | 4.84 Volt | 0 | 0 |
| 1762297282 | 12 Pkt/10m | 11 Pkt/10m | 4.86 Volt | 0 | 0 |
| 1762296081 | 13 Pkt/10m | 13 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1762294881 | 12 Pkt/10m | 12 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1762293681 | 11 Pkt/10m | 10 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1762292481 | 11 Pkt/10m | 11 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1762291280 | 16 Pkt/10m | 16 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1762290080 | 12 Pkt/10m | 12 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1762288880 | 17 Pkt/10m | 16 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1762287679 | 14 Pkt/10m | 14 Pkt/10m | 4.94 Volt | 0 | 0 |
| 1762286479 | 15 Pkt/10m | 15 Pkt/10m | 4.86 Volt | 0 | 0 |
| 1762285279 | 25 Pkt/10m | 21 Pkt/10m | 4.84 Volt | 0 | 0 |
| 1762284078 | 40 Pkt/10m | 39 Pkt/10m | 4.84 Volt | 0 | 0 |
| 1762282878 | 35 Pkt/10m | 35 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1762281678 | 41 Pkt/10m | 41 Pkt/10m | 4.86 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)