This is the latest recevied telemetry packets stored in our database for station/object DO1HOZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1764137785 | 954.9 hPa | 4 C deg | 45 % | 1014.8 hPa | 0 C deg |
| 1764134146 | 954 hPa | 3.9 C deg | 45 % | 1013.9 hPa | 0 C deg |
| 1764132348 | 953.7 hPa | 3.9 C deg | 44.9 % | 1013.6 hPa | 0 C deg |
| 1764130509 | 953.3 hPa | 3.9 C deg | 44.8 % | 1013.2 hPa | 0 C deg |
| 1764119660 | 951.8 hPa | 4.4 C deg | 44.4 % | 1011.4 hPa | 0 C deg |
| 1764115992 | 951.3 hPa | 4.6 C deg | 44.3 % | 1010.9 hPa | 0 C deg |
| 1764114181 | 951.2 hPa | 4.9 C deg | 44.2 % | 1010.7 hPa | 0 C deg |
| 1764112366 | 951.1 hPa | 4.9 C deg | 44.4 % | 1010.6 hPa | 0 C deg |
| 1764110557 | 950.8 hPa | 4.8 C deg | 44.5 % | 1010.3 hPa | 0 C deg |
| 1764106960 | 950.2 hPa | 5.3 C deg | 45.2 % | 1009.6 hPa | 0 C deg |
| 1764103291 | 948.8 hPa | 10.5 C deg | 46.3 % | 1006.9 hPa | 0 C deg |
| 1764097264 | 948.5 hPa | 22.1 C deg | 37.6 % | 1005.8 hPa | 0 C deg |
| 1764095432 | 948.1 hPa | 22.1 C deg | 37.7 % | 1005.4 hPa | 0 C deg |
| 1764091803 | 948 hPa | 21.2 C deg | 39.6 % | 1005.4 hPa | 0 C deg |
| 1764088168 | 947.1 hPa | 4.4 C deg | 67.6 % | 1008.1 hPa | 0 C deg |
| 1764086352 | 946.5 hPa | 4.8 C deg | 67.6 % | 1007.4 hPa | 0 C deg |
| 1764062740 | 947.3 hPa | 4 C deg | 66.6 % | 1008.4 hPa | 0 C deg |
| 1764059138 | 945.9 hPa | 3 C deg | 65.7 % | 1007.2 hPa | 0 C deg |
| 1764055486 | 944.7 hPa | 2.9 C deg | 64.8 % | 1005.9 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)