APRS Track Direct

☰

reset

PU5FJO-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PU5FJO-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RSSI*	VBAT*
1792249873	-62 dbm	2.91 V
1792249273	-62 dbm	2.9 V
1792248673	-63 dbm	2.9 V
1792248073	-63 dbm	2.9 V
1792247473	-63 dbm	2.9 V
1792246873	-64 dbm	2.9 V
1792246355	-63 dbm	2.9 V
1792245673	-63 dbm	2.9 V
1792245073	-63 dbm	2.9 V
1792244473	-63 dbm	2.9 V
1792243873	-65 dbm	2.9 V
1792243273	-63 dbm	2.9 V
1792242673	-64 dbm	2.9 V
1792242073	-64 dbm	2.9 V
1792241475	-64 dbm	2.9 V
1792240873	-64 dbm	2.9 V
1792240273	-64 dbm	2.9 V
1792239673	-64 dbm	2.9 V
1792239073	-64 dbm	2.9 V
1792238473	-64 dbm	2.9 V
1792237873	-64 dbm	2.9 V
1792237273	-64 dbm	2.9 V
1792236673	-63 dbm	2.9 V
1792236073	-64 dbm	2.9 V
1792235473	-63 dbm	2.91 V

*Used Equation Coefficients:

RSSI: 0, -1, 0

VBAT: 0, 0.01, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Maintained by UW0WU-1, based on APRS Track Direct