This is the latest recevied telemetry packets stored in our database for station/object DK1LO-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eCO2* | Temp.out* |
|---|---|---|---|---|---|
| 1766008044 | 1018.2 hPa | 18.1 C deg | 0 % | 891 ppm | 0 C deg |
| 1766008025 | 1018.1 hPa | 18.2 C deg | 0 % | 891 ppm | 0 C deg |
| 1766007945 | 1018.2 hPa | 18.3 C deg | 0 % | 923 ppm | 0 C deg |
| 1766007861 | 1018.2 hPa | 18.1 C deg | 0 % | 902 ppm | 0 C deg |
| 1766007780 | 1018.2 hPa | 18.3 C deg | 0 % | 918 ppm | 0 C deg |
| 1766007700 | 1018.1 hPa | 18.3 C deg | 0 % | 1012 ppm | 0 C deg |
| 1766007615 | 1018.1 hPa | 18.3 C deg | 0 % | 1029 ppm | 0 C deg |
| 1766007595 | 1018.1 hPa | 18.3 C deg | 0 % | 1029 ppm | 0 C deg |
| 1766007511 | 1018 hPa | 18.4 C deg | 0 % | 810 ppm | 0 C deg |
| 1766007490 | 1018 hPa | 18.4 C deg | 0 % | 810 ppm | 0 C deg |
| 1766007408 | 1018.1 hPa | 18.3 C deg | 0 % | 682 ppm | 0 C deg |
| 1766007388 | 1018 hPa | 18.3 C deg | 0 % | 660 ppm | 0 C deg |
| 1766007307 | 1018.1 hPa | 18.4 C deg | 0 % | 586 ppm | 0 C deg |
| 1766007226 | 1018 hPa | 18.4 C deg | 0 % | 620 ppm | 0 C deg |
| 1766007146 | 1018.1 hPa | 18.4 C deg | 0 % | 607 ppm | 0 C deg |
| 1766007126 | 1018 hPa | 18.4 C deg | 0 % | 607 ppm | 0 C deg |
| 1766007045 | 1018 hPa | 18.3 C deg | 0 % | 615 ppm | 0 C deg |
| 1766006968 | 1018.1 hPa | 18.3 C deg | 0 % | 561 ppm | 0 C deg |
| 1766006887 | 1018.1 hPa | 18.2 C deg | 0 % | 546 ppm | 0 C deg |
| 1766006866 | 1018 hPa | 18.2 C deg | 0 % | 546 ppm | 0 C deg |
| 1766006785 | 1018.1 hPa | 18.3 C deg | 0 % | 534 ppm | 0 C deg |
| 1766006765 | 1018.1 hPa | 18.3 C deg | 0 % | 534 ppm | 0 C deg |
| 1766006685 | 1018 hPa | 18.3 C deg | 0 % | 540 ppm | 0 C deg |
| 1766006601 | 1018.1 hPa | 18.2 C deg | 0 % | 501 ppm | 0 C deg |
| 1766006601 | 1018.1 hPa | 18.2 C deg | 0 % | 501 ppm | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eCO2: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)