This is the latest recevied telemetry packets stored in our database for station/object HS4RBS-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1836274815 | 0 Pkt | 2 Pkt | 0 Pkt | -55 dBm | 0 % |
| 1836273899 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 0 % |
| 1766090996 | 0 Pkt | 3 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766090080 | 0 Pkt | 15 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766089163 | 0 Pkt | 16 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766088246 | 0 Pkt | 13 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766087330 | 0 Pkt | 7 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766086414 | 0 Pkt | 25 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1766085494 | 0 Pkt | 14 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766084578 | 0 Pkt | 29 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766083657 | 0 Pkt | 14 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766082741 | 0 Pkt | 9 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766081821 | 0 Pkt | 26 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766080900 | 0 Pkt | 10 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766079984 | 0 Pkt | 8 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1766079069 | 0 Pkt | 20 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1766078151 | 0 Pkt | 12 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766077231 | 0 Pkt | 16 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1766076315 | 0 Pkt | 12 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766075394 | 0 Pkt | 33 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1766074477 | 0 Pkt | 42 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1766073555 | 0 Pkt | 15 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766072639 | 0 Pkt | 32 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766071723 | 0 Pkt | 32 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1766070797 | 0 Pkt | 20 Pkt | 0 Pkt | -59 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)