This is the latest recevied telemetry packets stored in our database for station/object 4S7CRA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751225310 | 38 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751224406 | 37 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751223501 | 36 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751222597 | 35 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751221693 | 34 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751220790 | 33 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751219886 | 32 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751218981 | 31 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751218077 | 30 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751217173 | 29 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751216269 | 28 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751215366 | 27 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751214461 | 26 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751213557 | 25 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751212654 | 24 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751211749 | 23 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751210938 | 22 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751210034 | 21 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751209131 | 20 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751208226 | 19 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751207322 | 18 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751206418 | 17 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751205514 | 16 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751204610 | 15 Count | 65 Count | 8 Count | 0 VDC | 0 VDC |
| 1751203706 | 13 Count | 59 Count | 7 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)