APRS Track Direct

My position About ☰

reset

9W2XRI-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2XRI-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1836274239	31 Pkt	8 Pkt	5 Pkt	-68 dBm	5.04 V
1762197788	1 Pkt	6 Pkt	4 Pkt	-46 dBm	5.09 V
1762196564	2 Pkt	4 Pkt	5 Pkt	-48 dBm	5.11 V
1762195339	1 Pkt	5 Pkt	4 Pkt	-44 dBm	5.11 V
1762194113	1 Pkt	2 Pkt	2 Pkt	-50 dBm	5.11 V
1762192891	0 Pkt	3 Pkt	0 Pkt	-51 dBm	5.11 V
1762191663	1 Pkt	3 Pkt	1 Pkt	-52 dBm	5.11 V
1762190438	0 Pkt	2 Pkt	0 Pkt	-50 dBm	5.11 V
1762189214	1 Pkt	2 Pkt	1 Pkt	-53 dBm	5.11 V
1762187988	1 Pkt	2 Pkt	1 Pkt	-51 dBm	5.11 V
1762186763	0 Pkt	0 Pkt	0 Pkt	-45 dBm	5.11 V
1762185538	0 Pkt	3 Pkt	0 Pkt	-46 dBm	5.11 V
1762184313	0 Pkt	9 Pkt	0 Pkt	-51 dBm	5.11 V
1762183085	0 Pkt	11 Pkt	0 Pkt	-50 dBm	5.11 V
1762181860	0 Pkt	9 Pkt	0 Pkt	-47 dBm	5.11 V
1762180634	0 Pkt	10 Pkt	0 Pkt	-46 dBm	5.11 V
1762179409	0 Pkt	9 Pkt	0 Pkt	-45 dBm	5.09 V
1762178184	0 Pkt	9 Pkt	0 Pkt	-45 dBm	5.11 V
1762176964	0 Pkt	9 Pkt	0 Pkt	-44 dBm	5.11 V
1762175733	0 Pkt	8 Pkt	0 Pkt	-45 dBm	5.11 V
1762174508	5 Pkt	5 Pkt	0 Pkt	-44 dBm	5.11 V
1762173282	1 Pkt	0 Pkt	0 Pkt	-45 dBm	5.11 V
1762172057	1 Pkt	0 Pkt	0 Pkt	-43 dBm	5.11 V
1762170833	0 Pkt	0 Pkt	0 Pkt	-43 dBm	5.11 V
1762169843	8 Pkt	18 Pkt	0 Pkt	-49 dBm	5.11 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)