APRS Track Direct

My position About ☰

reset

HB9CMI-40 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9CMI-40. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1764104853	951.6 hPa	18.9 C deg	32.8 %	1007 hPa	0 C deg
1764104351	951.5 hPa	18.9 C deg	32.8 %	1006.9 hPa	0 C deg
1764102535	951.2 hPa	19 C deg	32.8 %	1006.5 hPa	0 C deg
1764102398	951.2 hPa	19 C deg	32.8 %	1006.5 hPa	0 C deg
1764102319	951.1 hPa	19 C deg	32.8 %	1006.5 hPa	0 C deg
1764101623	951.1 hPa	19 C deg	32.9 %	1006.4 hPa	0 C deg
1764101006	951 hPa	19 C deg	33 %	1006.4 hPa	0 C deg
1764099191	950.6 hPa	19 C deg	33.2 %	1005.9 hPa	0 C deg
1764097374	950.5 hPa	19 C deg	33.6 %	1005.8 hPa	0 C deg
1764096998	950.4 hPa	19 C deg	33.6 %	1005.7 hPa	0 C deg
1764095183	950.1 hPa	19 C deg	34 %	1005.4 hPa	0 C deg
1764093368	949.8 hPa	19.1 C deg	33.9 %	1005.1 hPa	0 C deg
1764091553	949.6 hPa	19.7 C deg	32.9 %	1004.8 hPa	0 C deg
1764089736	949.2 hPa	21.5 C deg	30 %	1004 hPa	0 C deg
1764089668	949.2 hPa	21.5 C deg	29.9 %	1004 hPa	0 C deg
1764088997	949.1 hPa	21.6 C deg	29.6 %	1003.8 hPa	0 C deg
1764088860	949.1 hPa	21.6 C deg	29.6 %	1003.8 hPa	0 C deg
1764087949	948.7 hPa	21.7 C deg	29.4 %	1003.4 hPa	0 C deg
1764086985	948.6 hPa	21.9 C deg	29.2 %	1003.3 hPa	0 C deg
1764086258	948.4 hPa	21.9 C deg	29 %	1003.1 hPa	0 C deg
1764085255	948.2 hPa	22 C deg	28.7 %	1002.8 hPa	0 C deg
1764085201	948.3 hPa	22.1 C deg	28.7 %	1002.9 hPa	0 C deg
1764084536	948.1 hPa	22.1 C deg	28.4 %	1002.7 hPa	0 C deg
1764054438	943.7 hPa	21.3 C deg	30 %	1000.1 hPa	0 C deg
1764052623	943.9 hPa	21.3 C deg	29.8 %	1000.3 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)