APRS Track Direct

My position About ☰

reset

OE3LXF-36 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3LXF-36. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	QNH*	Temp.out*
1778027292	983.2 hPa	17.9 C deg	1013.7 hPa	15.7 C deg
1778023672	982.5 hPa	17.9 C deg	1013 hPa	15.7 C deg
1778021859	982.3 hPa	17.9 C deg	1012.7 hPa	15.7 C deg
1778018201	981.5 hPa	17.9 C deg	1011.9 hPa	15.7 C deg
1778007336	980 hPa	17.9 C deg	1010.3 hPa	15.7 C deg
1777998235	979.8 hPa	17.9 C deg	1010.1 hPa	15.7 C deg
1777992801	980.1 hPa	17.8 C deg	1010.5 hPa	15.7 C deg
1777990993	980.4 hPa	17.7 C deg	1010.8 hPa	15.7 C deg
1777983733	982.5 hPa	17.5 C deg	1013 hPa	15.7 C deg
1777981931	983 hPa	17.5 C deg	1013.5 hPa	15.7 C deg
1777980107	983.4 hPa	17.5 C deg	1013.9 hPa	15.7 C deg
1777976487	984.2 hPa	17.4 C deg	1014.7 hPa	15.7 C deg
1777974645	984.6 hPa	17.4 C deg	1015.1 hPa	15.7 C deg
1777971034	985.1 hPa	17.3 C deg	1015.6 hPa	15.7 C deg
1777969243	985.2 hPa	17.3 C deg	1015.7 hPa	15.7 C deg
1777963767	985.5 hPa	17.2 C deg	1016.1 hPa	15.7 C deg
1777956522	985.4 hPa	17 C deg	1016 hPa	15.7 C deg
1777954706	985.3 hPa	17 C deg	1015.9 hPa	15.7 C deg
1777943807	985.8 hPa	17.2 C deg	1016.4 hPa	15.7 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)