APRS Track Direct

My position About ☰

reset

OE3LXF-37 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3LXF-37. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	QNH*	Temp.out*
1773616159	991.8 hPa	11.7 C deg	1023.4 hPa	0 C deg
1773608863	991.7 hPa	11.8 C deg	1023.3 hPa	0 C deg
1773596179	990.3 hPa	11.9 C deg	1021.9 hPa	0 C deg
1773587083	989.3 hPa	11.9 C deg	1020.8 hPa	0 C deg
1773585267	989.2 hPa	11.9 C deg	1020.7 hPa	0 C deg
1773583452	989.2 hPa	11.9 C deg	1020.8 hPa	0 C deg
1773581637	989.2 hPa	11.9 C deg	1020.7 hPa	0 C deg
1773579822	989.2 hPa	11.9 C deg	1020.7 hPa	0 C deg
1773574377	989.3 hPa	11.9 C deg	1020.9 hPa	0 C deg
1773570769	989.4 hPa	11.9 C deg	1020.9 hPa	0 C deg
1773567117	989.1 hPa	11.9 C deg	1020.6 hPa	0 C deg
1773565301	988.9 hPa	11.9 C deg	1020.4 hPa	0 C deg
1773563486	988.7 hPa	11.9 C deg	1020.2 hPa	0 C deg
1773559856	988 hPa	11.9 C deg	1019.5 hPa	0 C deg
1773558043	987.4 hPa	11.8 C deg	1018.9 hPa	0 C deg
1773552596	985.8 hPa	11.9 C deg	1017.2 hPa	0 C deg
1773550781	985.1 hPa	11.9 C deg	1016.5 hPa	0 C deg
1773548966	984.7 hPa	11.9 C deg	1016 hPa	0 C deg
1773547169	984.2 hPa	11.9 C deg	1015.5 hPa	0 C deg
1773545336	983.8 hPa	11.9 C deg	1015.1 hPa	0 C deg
1773543521	983.4 hPa	12 C deg	1014.7 hPa	0 C deg
1773541706	982.8 hPa	12 C deg	1014.1 hPa	0 C deg
1773539891	982.3 hPa	12 C deg	1013.6 hPa	0 C deg
1773536261	981.5 hPa	12 C deg	1012.8 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)