This is the latest recevied telemetry packets stored in our database for station/object SR9GM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1739740252 | 12.56 Volt | 310 Pkt | 80 Pkt | 54 Pcnt | 0 None |
| 1739738752 | 12.56 Volt | 310 Pkt | 80 Pkt | 53 Pcnt | 0 None |
| 1739737252 | 12.56 Volt | 330 Pkt | 80 Pkt | 53 Pcnt | 0 None |
| 1739735752 | 12.56 Volt | 340 Pkt | 80 Pkt | 54 Pcnt | 0 None |
| 1739734253 | 12.56 Volt | 330 Pkt | 90 Pkt | 51 Pcnt | 0 None |
| 1739732752 | 12.56 Volt | 350 Pkt | 120 Pkt | 52 Pcnt | 0 None |
| 1739731254 | 12.56 Volt | 390 Pkt | 130 Pkt | 52 Pcnt | 0 None |
| 1739729753 | 12.56 Volt | 400 Pkt | 120 Pkt | 48 Pcnt | 0 None |
| 1739728253 | 12.56 Volt | 350 Pkt | 90 Pkt | 46 Pcnt | 0 None |
| 1739726753 | 12.56 Volt | 350 Pkt | 90 Pkt | 47 Pcnt | 0 None |
| 1739725257 | 12.56 Volt | 400 Pkt | 110 Pkt | 50 Pcnt | 0 None |
| 1739723755 | 12.56 Volt | 450 Pkt | 120 Pkt | 53 Pcnt | 0 None |
| 1739722253 | 12.56 Volt | 440 Pkt | 120 Pkt | 54 Pcnt | 0 None |
| 1739720762 | 12.56 Volt | 420 Pkt | 140 Pkt | 51 Pcnt | 0 None |
| 1739719253 | 12.56 Volt | 430 Pkt | 170 Pkt | 52 Pcnt | 0 None |
| 1739717754 | 12.56 Volt | 450 Pkt | 180 Pkt | 52 Pcnt | 0 None |
| 1739716254 | 12.56 Volt | 430 Pkt | 150 Pkt | 51 Pcnt | 0 None |
| 1739714754 | 12.56 Volt | 440 Pkt | 150 Pkt | 53 Pcnt | 0 None |
| 1739713253 | 12.56 Volt | 420 Pkt | 120 Pkt | 54 Pcnt | 0 None |
| 1739711753 | 12.56 Volt | 380 Pkt | 100 Pkt | 56 Pcnt | 0 None |
| 1739710253 | 12.56 Volt | 370 Pkt | 100 Pkt | 58 Pcnt | 0 None |
| 1739708753 | 12.56 Volt | 360 Pkt | 90 Pkt | 55 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)