APRS Track Direct

My position About ☰

reset

HS3RXX-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS3RXX-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1766185071	17 ug/m3	24 ug/m3	25 ug/m3	-86 dBm	11.5 V
1766184828	21 ug/m3	29 ug/m3	36 ug/m3	-87 dBm	11.5 V
1766183906	17 ug/m3	25 ug/m3	27 ug/m3	-86 dBm	11.48 V
1766182984	19 ug/m3	26 ug/m3	28 ug/m3	-85 dBm	11.48 V
1766182062	18 ug/m3	27 ug/m3	31 ug/m3	-84 dBm	11.5 V
1766181140	19 ug/m3	25 ug/m3	28 ug/m3	-85 dBm	11.5 V
1766180218	18 ug/m3	28 ug/m3	34 ug/m3	-85 dBm	11.63 V
1766179302	19 ug/m3	26 ug/m3	34 ug/m3	-85 dBm	11.63 V
1766178374	18 ug/m3	28 ug/m3	34 ug/m3	-85 dBm	11.63 V
1766177452	20 ug/m3	28 ug/m3	31 ug/m3	-85 dBm	11.63 V
1766176530	17 ug/m3	25 ug/m3	29 ug/m3	-85 dBm	11.63 V
1766175608	18 ug/m3	26 ug/m3	27 ug/m3	-85 dBm	11.5 V
1766174686	18 ug/m3	26 ug/m3	28 ug/m3	-84 dBm	11.63 V
1766173763	18 ug/m3	25 ug/m3	30 ug/m3	-83 dBm	11.5 V
1766172841	17 ug/m3	27 ug/m3	34 ug/m3	-84 dBm	11.63 V
1766171919	17 ug/m3	24 ug/m3	26 ug/m3	-85 dBm	11.5 V
1766170997	16 ug/m3	25 ug/m3	28 ug/m3	-85 dBm	11.65 V
1766170075	17 ug/m3	26 ug/m3	28 ug/m3	-85 dBm	11.5 V
1766169153	15 ug/m3	24 ug/m3	26 ug/m3	-87 dBm	11.5 V
1766168231	19 ug/m3	26 ug/m3	32 ug/m3	-86 dBm	11.63 V
1766167309	18 ug/m3	22 ug/m3	23 ug/m3	-88 dBm	11.65 V
1766166387	16 ug/m3	26 ug/m3	33 ug/m3	-86 dBm	11.53 V
1766165465	16 ug/m3	23 ug/m3	23 ug/m3	-86 dBm	11.65 V
1766164543	17 ug/m3	23 ug/m3	24 ug/m3	-85 dBm	11.65 V
1766163621	17 ug/m3	26 ug/m3	26 ug/m3	-86 dBm	11.65 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)