This is the latest recevied telemetry packets stored in our database for station/object EA3BE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750203512 | 414 | 0 | 0 | 0 | 0 |
| 1750201715 | 411 | 0 | 0 | 0 | 0 |
| 1750199912 | 412 | 0 | 0 | 0 | 0 |
| 1750198112 | 416 | 0 | 0 | 0 | 0 |
| 1750196312 | 422 | 0 | 0 | 0 | 0 |
| 1750194512 | 423 | 0 | 0 | 0 | 0 |
| 1750192712 | 421 | 0 | 0 | 0 | 0 |
| 1750190912 | 415 | 0 | 0 | 0 | 0 |
| 1750189111 | 413 | 0 | 0 | 0 | 0 |
| 1750187311 | 421 | 0 | 0 | 0 | 0 |
| 1750185511 | 419 | 0 | 0 | 0 | 0 |
| 1750183711 | 415 | 0 | 0 | 0 | 0 |
| 1750181911 | 411 | 0 | 0 | 0 | 0 |
| 1750180111 | 411 | 0 | 0 | 0 | 0 |
| 1750178311 | 416 | 0 | 0 | 0 | 0 |
| 1750176511 | 411 | 0 | 0 | 0 | 0 |
| 1750174711 | 414 | 0 | 0 | 0 | 0 |
| 1750172911 | 419 | 0 | 0 | 0 | 0 |
| 1750171110 | 419 | 0 | 0 | 0 | 0 |
| 1750169310 | 413 | 0 | 0 | 0 | 0 |
| 1750167510 | 418 | 0 | 0 | 0 | 0 |
| 1750165710 | 420 | 0 | 0 | 0 | 0 |
| 1750163910 | 417 | 0 | 0 | 0 | 0 |
| 1750162110 | 419 | 0 | 0 | 0 | 0 |
| 1750160310 | 412 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)