This is the latest recevied telemetry packets stored in our database for station/object OE5RGM-55. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1778012594 | 911 hPa | 10.6 C deg | 89.2 % | 1017.1 hPa | 11.1 C deg |
| 1778007142 | 910.5 hPa | 12.6 C deg | 76.5 % | 1015.7 hPa | 13.8 C deg |
| 1778005347 | 909.8 hPa | 14.7 C deg | 57.5 % | 1014.1 hPa | 16 C deg |
| 1778003522 | 908.9 hPa | 18.8 C deg | 36.6 % | 1011.6 hPa | 18.9 C deg |
| 1777999882 | 908.9 hPa | 21.2 C deg | 30.6 % | 1010.7 hPa | 21.7 C deg |
| 1777992622 | 909.6 hPa | 25 C deg | 22.7 % | 1010.2 hPa | 27.9 C deg |
| 1777992080 | 909.7 hPa | 24 C deg | 22.6 % | 1010.6 hPa | 25.7 C deg |
| 1777979906 | 911.4 hPa | 22.8 C deg | 27.3 % | 1012.9 hPa | 46.1 C deg |
| 1777974898 | 912 hPa | 21.9 C deg | 32.5 % | 1013.9 hPa | 39.7 C deg |
| 1777973086 | 912.2 hPa | 21.7 C deg | 33.1 % | 1014.1 hPa | 40.5 C deg |
| 1777965817 | 912.6 hPa | 19.6 C deg | 41.1 % | 1015.4 hPa | 25.5 C deg |
| 1777962199 | 912.8 hPa | 17.8 C deg | 44 % | 1016.3 hPa | 24.5 C deg |
| 1777960372 | 912.9 hPa | 17.3 C deg | 48.7 % | 1016.6 hPa | 19.8 C deg |
| 1777958557 | 913 hPa | 13.8 C deg | 57.9 % | 1018.1 hPa | 13.7 C deg |
| 1777953111 | 913.2 hPa | 12.4 C deg | 58.5 % | 1018.8 hPa | 9.9 C deg |
| 1777951296 | 913.3 hPa | 12.5 C deg | 60.4 % | 1019 hPa | 10.8 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)