APRS Track Direct

My position About ☰

reset

XE2KK-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2KK-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1753605178	14.18 Volt	50 Pkt	30 Pkt	100 Pcnt	36.5 C
1753604278	14.18 Volt	70 Pkt	40 Pkt	100 Pcnt	36.5 C
1753603379	14.1 Volt	100 Pkt	60 Pkt	100 Pcnt	36.5 C
1753602478	14.1 Volt	90 Pkt	50 Pkt	100 Pcnt	36.5 C
1753601578	14.1 Volt	90 Pkt	50 Pkt	100 Pcnt	36.5 C
1753600678	14.1 Volt	70 Pkt	40 Pkt	100 Pcnt	36.5 C
1753599778	14.1 Volt	40 Pkt	20 Pkt	100 Pcnt	36.5 C
1753598878	14.1 Volt	40 Pkt	20 Pkt	100 Pcnt	37 C
1753597978	14.1 Volt	40 Pkt	20 Pkt	100 Pcnt	37 C
1753597078	14.1 Volt	60 Pkt	40 Pkt	100 Pcnt	37 C
1753596178	14.1 Volt	60 Pkt	40 Pkt	100 Pcnt	37 C
1753595278	14.1 Volt	60 Pkt	40 Pkt	100 Pcnt	37 C
1753594378	14.1 Volt	90 Pkt	60 Pkt	98 Pcnt	37 C
1753593479	14.1 Volt	70 Pkt	40 Pkt	98 Pcnt	37 C
1753592578	14.1 Volt	70 Pkt	40 Pkt	98 Pcnt	37 C
1753591678	14.1 Volt	70 Pkt	40 Pkt	100 Pcnt	37 C
1753590778	14.1 Volt	40 Pkt	20 Pkt	100 Pcnt	37 C
1753589878	14.18 Volt	40 Pkt	20 Pkt	100 Pcnt	37 C
1753588978	14.18 Volt	40 Pkt	20 Pkt	100 Pcnt	37 C
1753588078	14.1 Volt	40 Pkt	20 Pkt	100 Pcnt	37 C
1753587178	14.1 Volt	40 Pkt	20 Pkt	100 Pcnt	37 C
1753586278	14.18 Volt	40 Pkt	20 Pkt	100 Pcnt	37.5 C
1753585378	14.18 Volt	40 Pkt	20 Pkt	97 Pcnt	37.5 C
1753584478	14.18 Volt	50 Pkt	30 Pkt	98 Pcnt	37.5 C
1753583578	14.1 Volt	60 Pkt	30 Pkt	98 Pcnt	37.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)