APRS Track Direct

My position About ☰

reset

BV3BA-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BV3BA-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM2.5*	PM10*	CO*	O3*
1758219484	16 ug/m3	28 ug/m3	0.26 ppm	17 ppb
1758218884	16 ug/m3	28 ug/m3	0.26 ppm	17 ppb
1758218283	13 ug/m3	26 ug/m3	0.32 ppm	13 ppb
1758217683	13 ug/m3	26 ug/m3	0.32 ppm	13 ppb
1758217083	13 ug/m3	26 ug/m3	0.32 ppm	13 ppb
1758216483	13 ug/m3	26 ug/m3	0.32 ppm	13 ppb
1758215883	13 ug/m3	26 ug/m3	0.32 ppm	13 ppb
1758215283	13 ug/m3	26 ug/m3	0.32 ppm	13 ppb
1758214683	16 ug/m3	25 ug/m3	0.3 ppm	26 ppb
1758214083	16 ug/m3	25 ug/m3	0.3 ppm	26 ppb
1758213483	16 ug/m3	25 ug/m3	0.3 ppm	26 ppb
1758212883	16 ug/m3	25 ug/m3	0.3 ppm	26 ppb
1758212283	16 ug/m3	25 ug/m3	0.3 ppm	26 ppb
1758211683	22 ug/m3	24 ug/m3	0.3 ppm	40 ppb
1758211084	22 ug/m3	24 ug/m3	0.3 ppm	40 ppb
1758210483	22 ug/m3	24 ug/m3	0.3 ppm	40 ppb
1758209884	22 ug/m3	24 ug/m3	0.3 ppm	40 ppb
1758209283	22 ug/m3	24 ug/m3	0.3 ppm	40 ppb
1758208683	22 ug/m3	24 ug/m3	0.3 ppm	40 ppb
1758208083	22 ug/m3	24 ug/m3	0.3 ppm	40 ppb
1758207484	16 ug/m3	30 ug/m3	0.43 ppm	20 ppb
1758206883	16 ug/m3	30 ug/m3	0.43 ppm	20 ppb
1758206284	16 ug/m3	30 ug/m3	0.43 ppm	20 ppb
1758205683	16 ug/m3	30 ug/m3	0.43 ppm	20 ppb
1758205083	16 ug/m3	30 ug/m3	0.43 ppm	20 ppb

*Used Equation Coefficients:

PM2.5: 0, 1, 0

PM10: 0, 1, 0

UV: 0, 1, 0

CO: 0, 0.01, 0

O3: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)