This is the latest recevied telemetry packets stored in our database for station/object EA6ADB-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1768192121 | 5 | 31.6 C | 3.65 V | 500 M | 0 |
| 1768190695 | 5 | 31.5 C | 3.65 V | 480 M | 0 |
| 1768188881 | 6 | 31.5 C | 3.68 V | 490 M | 0 |
| 1768188099 | 4 | 31.4 C | 3.58 V | 450 M | 0 |
| 1768187591 | 5 | 31.1 C | 3.57 V | 360 M | 0 |
| 1768187182 | 4 | 30.8 C | 3.68 V | 470 M | 0 |
| 1768186970 | 4 | 30.3 C | 3.69 V | 420 M | 0 |
| 1768186628 | 4 | 29.5 C | 3.67 V | 850 M | 0 |
| 1768182208 | 7 | 31.6 C | 3.65 V | 520 M | 0 |
| 1768180700 | 7 | 31.6 C | 3.68 V | 500 M | 0 |
| 1768179543 | 7 | 31.6 C | 3.68 V | 490 M | 0 |
| 1768178223 | 6 | 31.5 C | 3.68 V | 490 M | 0 |
| 1768177351 | 6 | 31.5 C | 3.68 V | 280 M | 0 |
| 1768176532 | 7 | 31.5 C | 3.68 V | 490 M | 0 |
| 1768175853 | 7 | 31.3 C | 3.68 V | 500 M | 0 |
| 1768175449 | 6 | 31.1 C | 3.69 V | 480 M | 0 |
| 1768175197 | 6 | 30.6 C | 3.73 V | 470 M | 0 |
| 1768175036 | 6 | 30.2 C | 3.67 V | 440 M | 0 |
| 1768174869 | 3 | 29.5 C | 3.69 V | 570 M | 0 |
| 1768148984 | 6 | 31.2 C | 3.64 V | 500 M | 0 |
| 1768148765 | 5 | 30.6 C | 3.56 V | 280 M | 0 |
| 1768147982 | 6 | 31.4 C | 3.64 V | 480 M | 0 |
| 1768147313 | 5 | 30.5 C | 3.64 V | 450 M | 0 |
| 1768147150 | 5 | 29.9 C | 3.64 V | 370 M | 0 |
| 1768146145 | 4 | 31.6 C | 3.65 V | 490 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)